Sharp KC-850U Cautions Concerning Operation, Installation Guidelines, Filter Guidelines, English

Page 9
CAUTIONS CONCERNING OPERATION

CAUTIONS CONCERNING OPERATION

Do not block the intake and/or air outlet.

Do not use the unit near or on hot objects, such as stoves or heaters or where it may come into contact with steam.

Always operate the unit in an upright position.

Always hold the handles on both sides of the unit when moving it.

Holding the back panel when carrying may cause it to detach, thus dropping the unit and resulting in bodily injury.

Do not operate the unit without the filters, Water Tank, and Humidifying Tray properly in- stalled.

Do not wash and reuse the True HEPA filter.

Washing will not improve filter performance, it may cause electric shock or malfunction.

Clean the exterior with a soft cloth only. Do not use volatile fluids and/or detergents.

The unit surface may be damaged or cracked.

In addition, the sensors may malfunction as a result.

Frequency of maintenance required (descaling) will depend on the hardness or the impuri- ties of the water that you use; the harder the water the more often descaling will be neces- sary.

Keep the unit away from water.

ENGLISH

INSTALLATION GUIDELINES

During the operation of the product, please place the unit at least 6.5ft. (2m) away from equipment utilizing electrical waves such as televisions, radios or wave clocks.

Avoid a location where the sensor is exposed to direct breeze or draft.

The unit may not operate properly.

Avoid use in locations where furniture, fabrics or other items may come in contact with and restrict the air intake and/or air outlet.

Avoid use in locations where the unit is exposed to condensation or rapid temperature changes. (Use under appropriate conditions between 41 - 95˚F (5 - 35˚C) in the room.)

(If it is unavoidable please allow unit to stand for 1 hour before switching on.)

Place on a stable surface with sufficient air circulation.

When placing the unit on a heavily carpeted area, the unit may vibrate slightly.

Place the unit on an even surface to avoid water leakage from the Water Tank and/or Humidifying Tray.

Avoid use in locations where grease or oily smoke is generated.(such as in a kitchen, etc.).

The unit surface may crack or the sensor may malfunction as a result.

Place the unit about 1-2 ft. (30 - 60cm) away from the wall in order to ensure proper airflow.

The wall directly behind the air outlet may become dirty over time. When using the unit for an extended period of time in the same location, periodically clean the wall and protect the wall with a vinyl sheet, etc. to prevent the wall from becoming dirty.

FILTER GUIDELINES

Follow the instructions in this manual for correct care and maintenance of the filters. Use only filters designed for this product.

E-7

Image 9
Contents Purificateur d’air à fonction d’humidification AIR PURIFIER with Humidifying FunctionMANUEL D’UTILISATION PURIFICADOR DE AIRE MANUAL DE OPERACIÓNWashable Deodorizing filter black Pre-filter True HEPA filter whiteFEATURES CONTENTSENGLISH FOR CUSTOMER ASSISTANCE the United States ACCESSORIES ADDITIONAL CUSTOMER INFORMATIONPARTS for your Authorized Parts Distributor Sharp Electronics CorporationSHARP ELECTRONICS CORPORATION CONSUMER LIMITED WARRANTYCONSUMER LIMITED WARRANTY FOR U.S. USERS Warranty Period for this Product335 Britannia Road East FOR CUSTOMER ASSISTANCE CanadaMississauga, Ontario L4Z 1W9 ACCESSORIES ADDITIONAL CUSTOMER INFORMATIONConsumer Electronics Products LIMITED WARRANTYCongratulations on your purchase SERVICEIMPORTANT SAFETY INSTRUCTIONS CAUTIONS CONCERNING OPERATION INSTALLATION GUIDELINESFILTER GUIDELINES ENGLISHILLUSTRATIVE DIAGRAM - FRONT PART NAMESBACK FRONT MONITOR MAIN UNIT DISPLAYFilter Reset Button Indicator Light red2 Install the filters FILTER INSTALLATIONInstall the True HEPA filter 1 Remove the filters1 Removetop. the Water Tank by unlatching the REFILLING THE WATER TANK3After filling, securely tighten the Tank Cap 4Replace the Water Tank in the unitCLEAN AIR MODE CLEAN AIR & HUMIDIFY MODE2 PressButton.the CLEAN AIR & HUMIDIFY MODE 1 Press the CLEAN AIR MODE Button on the displayPOWER OFF Button QUICK CLEAN MODEFAN SPEED Button Plasmacluster ON/OFF ButtonADJUSTMENT OF SENSOR DETECTION SENSITIVITY WATER SUPPLY INDICATOR LIGHTSound indicator setting for water supply 3 Press the Power OFF ButtonFILTER INDICATOR LIGHT Care Cycle CARE AND MAINTENANCEWhen the back panel has stubborn dirt BACK PANEL and SENSORSWASHABLE DEODORIZING FILTER CARE WATER TANK2Drip dry filter to remove excess water 4 Replace the filter in unit. See E-102Rinse the Humidifying Tray with lukewarm water HUMIDIFYING TRAY1Remove the Water Tank and Humidifying Tray HUMIDIFYING FILTER3 Preparingtion. the descaling solu CARE AND MAINTENANCEGuide for filter replacement timing FILTER REPLACEMENT GUIDELINESReplacement Filters Replacing the FiltersE-20 TROUBLESHOOTINGE-2 ERROR DISPLAYFlashing of the Clean Air Humidify Indicator LightSPECIFICATIONS E-22Standby Power ENGLISH Filtre désodorisant lavable noir Pré-filtre Filtre HEPA authentique blancFRANÇAIS CARACTÉRISTIQUESTABLE DES MATIÈRES POUR VOUS PROTÉGER Produits Électronique grand public GARANTIE LIMITÉEBravo! Vous Venez de faire un excellent achat LE SERVICEINSTRUCTIONS DE SÉCURITÉ IMPORTANTES PRÉCAUTIONS CONCERNANT LE FONCTIONNEMENT GUIDE D’INSTALLATIONGUIDE D’UTILISATION DES FILTRES FRANÇAISDÉSIGNATION DES PIÈCES SCHÉMA ILLUSTRATIF - AVANTDOS DE L’APPAREIL MONITEUR AVANT AFFICHAGE DE L’UNITÉ PRINCIPALEFRANÇAIS des témoins2 Installez les filtres INSTALLATION DES FILTRES1 Installez le filtre HEPA authentique 1 Retirez les filtresAprès le remplissage, serrez bien le bou REMPLISSAGE DU RÉSERVOIR D’EAU3 chon du réservoir 4 Replacez le réservoir d’eau dans l’appareilFONCTIONNEMENT MODE D’ÉPURATION DE L’AIRMODE D’ÉPURATION DE L’AIR ET D’HUMIDIFICATION Bouton DE VITESSE DU VENTILATEUR MODE D’ÉPURATION RAPIDEBouton D’ARRÊT DE L’APPAREIL Bouton DE MARCHE/ARRÊT DU PlasmaclusterLAMPE D’ALIMENTATION EN EAU Bouton DE CONTRÔLE DES TÉMOINSRÉGLAGE DE LA SENSIBILITÉ DES CAPTEURS AnnulationLAMPE DU FILTRE SOIN ET ENTRETIENPANNEAU ARRIÈRE ET CAPTEURS APPAREILRÉSERVOIR D’EAU SOIN ET ENTRETIENENTRETIEN DU FILTRE DÉSODORISANT LAVABLE F-5 BAC D’HUMIDIFICATIONFILTRE D’HUMIDIFICATION F-6SOIN ET ENTRETIEN Guide de remplacement des filtres GUIDE DE REMPLACEMENT DES FILTRESRemplacement des filtres Filtres de rechangeF-8 RÉSOLUTION DES PROBLÈMESF-9 AFFICHAGE D’ERREURFRANÇAIS Clignotement de la lampeCARACTÉRISTIQUES F-20Consommation en veille FRANÇAIS F-2NOTA Lea antes de operar su nuevo Purificador de aireESPAÑOL CARACTERÍSTICASCONTENIDO INSTRUCCIONES DE SEGURIDAD IMPORTANTES PAUTAS PARA LA INSTALACIÓN PRECAUCIONES RELACIONADAS CON LA OPERACIÓNPAUTAS PARA EL FILTRO ESPAÑOLDIAGRAMA ILUSTRATIVO - PARTE FRONTAL NOMBRE DE LAS PARTESPARTE POSTERIOR MONITOR FRONTAL PANTALLA DE LA UNIDAD PRINCIPALESPAÑOL Botón reestablecer filtro1 Retire los filtros INSTALACIÓN DEL FILTRO2 Instale los filtros 1 Instale el filtro HEPALLENADO DEL TANQUE DE AGUA 4 Reemplace el tanque de agua en la unidadPRECAUCIÓN 2 Presione el botón de Modo CLEAN AIR MODO CLEAN AIR AIRE LIMPIOOPERACIÓN 1 Llene el tanque de agua. Vea S-7Botón POWER OFF APAGADO MODO QUICK CLEAN LIMPIEZA RÁPIDABotón FAN SPEED VELOCIDAD DEL VENTILADOR Botón Plasmacluster ON/OFF ENCENDIDO/APAGADOLUZ DEL INDICADOR DE SUMINISTRO DE AGUA Botón LIGHTS CONTROL CONTROL DE LUCESAJUSTE DE LA SENSIBILIDAD DE DETECCIÓN DEL SENSOR OPERACIÓNDEL FILTRO CUIDADO Y MANTENIMIENTOPANEL POSTERIOR y SENSORES UNIDADCUIDADO DEL FILTRO DESODORIZADOR LAVABLE TANQUE DE AGUA4 Reemplazo del filtro en la unidad. Vea S-6 S-12PRECAUCIÓN BANDEJA DEL HUMIDIFICADORFILTRO DEL HUMIDIFICADOR S-14CUIDADO Y MANTENIMIENTO Guía para programar el reemplazo del filtro PAUTAS PARA REEMPLAZAR EL FILTROFiltros de reemplazo Reemplazo de los filtrosS-16 LOCALIZACIÓN DE FALLASS-17 MENSAJES DE ERRORESPAÑOL Destello de la luz delESPECIFICACIONES S-18Energía de reserva ESPAÑOL SHARP CORPORATION SHARP ELECTRONICS CORPORATIONSHARP CORPORATION Sharp Plaza, Mahwah