q Operating
Instructions
Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
1.Set the Fan Control to the desired setting (Figure 1). You can use either the ENERGY SAVER or NORMAL FAN settings. (See “Usingthe ENERGY SAVER settings” on page 10.)
QUICK COMFORT ..............................for fastest cooling
MED | ,.,.,,.,.,............................ for normal cooling |
LOW ................................................ for sleeping comfort FAN ONLY ...................for circulating air without cooling
NOTE: Set the Exhaust Vent Control to CLOSED for maximum cooling.
2.Turn the Thermostat to a
NOTES:
l
l
if you turn the air conditioner off, wait at least
3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.
Do not try to operate your air conditioner when the outside temperature is below 65°F (18°C). The inside evaporator coil may freeze up and the air conditioner may not operate properly.