TRIPLE-FLEX Right Flue Collector View, Home

Actual length and width are 3⁄8” less than trade size shown. Filters meet UL Class 2 flame retardance requirements. Maximum temperature is 180° F.

2.1.8TRIPLE-FLEX RIGHT FLUE COLLECTOR VIEW

Date: 8-4-2010

Revision: 0

Form: 2396

2.2.2HOME PAGE

Make sure a screen similar to Figure 12 appears after the system is completely powered up. The directional map shown before each page description in this manual will start with this

symbol . Pressing this symbol will return you to the home page.

Figure 11 Triple-Flex Right Flue Collector View

1.High primary air-to-air exchanger pressure. This switch will trip when the air pressure in the primary air-to-air exchanger rises above the set-point, indicating that the primary air- to-air exchanger has become plugged with dust or other foreign matter.

2.Condensate trap cleanout. This connection is ½” NPT.

3.Condensate trap. The condensate trap is welded and fixed into place.

4.Flue vent temperature sensor.

2.2SOLA HYDRONIC CONTROL SYSTEM

The Triple-Flex is equipped with a Honeywell SOLA control system (Figure 3 item 5). This section will explain navigation, configuration, history, and diagnostics.

2.2.1POWER-UP VALIDATION

Flip the power button, (Figure 3 item 6), to the on position. After a few seconds the Home page will appear and the POWER LED will be blinking when the device is properly powered. Select the Setup button to adjust the contrast as desired.

Figure 12 Home Page

On multi-boiler applications, each boiler in the hydronic system is represented on the Home page by an icon and name. Pressing the boiler icon allows the user to zoom in on that boiler and see specific details about it. These details are provided on a new page, which can include additional buttons that display additional detail and operation information, which itself leads to other pages. The pages are traversed in a tree structure method. The boiler icon button will appear in one of four colors indicating the boiler status.

•Blue: Normal operation

•Red: Lockout condition

•Gray: Standby mode (burner switch off)

•Gray and crossed out: Hydronic control communication error (disconnected or powered off)

Up to 8 boilers can be displayed on the System Home page.

The name of each boiler is displayed next to the boiler icon. When Lead Lag is enabled, the system header temperature and firing rate are displayed for each boiler. When the burner is in standby or not firing the firing rate is not displayed.