GE GXSH39E, GNSH45E installation instructions For The Period We Will Replace, What Is Not Covered

Page 31

GE Water Softening System Warranty. (For Customers in the United States)

All warranty service provided by our SmartWaterAuthorized Servicer Network. To schedule service, call 800.952.5039 (U.S.) or 866.777.7627 (Canada). Please have serial number and model number available when calling for service.

Staple your receipt here.

Proof of the original purchase date is needed to obtain service under the warranty.

For The Period Of:

We Will Replace:

 

One Year

Any part of the Water Softening System which fails due to a defect in materials or workmanship.

From the date of the

During this limited one-year warranty, GE will also provide, free of charge, all labor and related

original purchase

service to replace the defective part.

 

 

 

Three Years

The electronic monitor, if it fails due to a defect in materials or workmanship. During this

From the date of the

three-year limited warranty, you will be responsible for any labor or related service costs.

original purchase

 

 

 

 

 

Ten Years

From the date of the original purchase

A replacement brine tank or cabinet, if either fails due to a defect in materials or workmanship. During this ten-year limited warranty, you will be responsible for any labor or related service costs.

What Is Not Covered:

Service trips to your home to teach you how to use the product.

Improper installation, delivery or maintenance.

Failure of the product if it is abused, misused, altered, used commercially or used for other than the intended purpose.

Use of this product where water is microbiologically unsafe or of unknown quality, without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.

Replacement of house fuses or resetting of circuit breakers.

Damage to the product caused by accident, fire, floods or acts of God.

Incidental or consequential damage caused by possible defects with this appliance, its installation or repair.

Product not accessible to provide required service.

EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive remedy is product repair as provided in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. If the product is located in an area where service by a GE Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service location for service.

In Alaska, the warranty excludes the cost of shipping or service calls to your home.

Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor: General Electric Company. Louisville, KY 40225

31

Image 31
Contents Write the model and serial numbers here Model # Safety InformationCare and Cleaning 7283950 215C1173P025 49-50180-112-06 JRSafety Precautions Important Installation Recommendations Before Beginning InstallationRead these instructions completely and carefully Unpacking and Inspection Where to Install the SoftenerTransit OUT Plan HOW YOU will Install the SoftenerPush all the way Install Bypass ValveInstall Drain Fitting Before YOU BeginPlumb in and OUT Pipes to and from Softener Connect and RUN the Valve Drain HoseConnecting a Rigid Valve Drain Tube Install the Brine TankADD Water and Salt to the Brine Tank Install Grounding ClampWith salt SET Water Hardness Number Connect to Electrical PowerProgramming the Control SET Present Time of DAYSET Salt Level SET Recharge Starting TimeDays to Empty Feature Other Data Displays Optional Control SettingsError Signals SignalsLost Time Signal LOW Salt SignalImportant Press and hold for 3 seconds Sanitizing Procedures19″ 471⁄2″ 411⁄4″ 16″ About the water softener system Breaking a Salt Bridge Cleaning the Nozzle and Venturi AssemblyNormal Operation, Control Displays Feature Optional Recharge ControlsFeature Memory Feature/Service Automatic Electronic DiagnosticsERR Service Electronic Demand Time Features and ServiceService Timer/Softener, Service Checkout Procedure To remove an error code 1. Unplug transformerOperation of Diagnostics Service Set Model F or P CodeIf the water softening system does not draw brine, check However, you must keep the tank supplied with salt Care and cleaning of the water softening systemCleaning Iron Out of the Water Softening System Checking the Salt Storage Level and RefillingTaken not plumbed to soft water Before you call for service…What To Do No soft waterWater in brine tank Excessive/high levelColored water Resin beads showing Brown/yellow colored Water after installationSalty tasting or Brown/yellowPage Page Parts list 151 General Electric Parts Catalog Parts catalogSupport Screen For The Period We Will Replace What Is Not CoveredWarrantor General Electric Company. Louisville, KY Warrantor Mabe Canada INC GE Water Softening System Warranty. For Customers in CanadaOne Year De agua Cuidado y limpieza Cómo limpiar la ensambladuraDe averías Advertencia No use con agua AdvertenciaLea estas instrucciones completa y cuidadosamente Recomendaciones Importantes Para LA InstalaciónDonde Instalar EL Descalcificador Desempacado E InspecciónHerramientas Y Materiales Necesarios Para LA Instalación Ilustración DE Instalación Normal Planifique LA Instalación DEL DescalcificadorComo se muestra Antes DE ComenzarInstale LA Válvula DE Bypass Remueva el tapón plástico de embalaje y el cable de laCerciórese de cumplir con los códigos locales Retire el descalcificador del lugar de instalaciónCont Instale LOS Accesorios DESobreflujo DEL Tanque DE Salmuera Y LA MangueraCierre todos los grifos de agua Instale LA Abrazadera DE TierraHora actual Conectar a LA Fuente EléctricaProgramación DEL Control Ajuste LA Hora DEL DÍADe sal Ajuste EL Nivel DE SALDías Hasta Vacío De recargaDEL Sistema Ajustes Opcionales DE ControlEficiencia DE LA SAL Característica Otras Visualizaciones DE DatosSeñal DE Bajo Nivel DE SAL Señales DE ErrorSeñals Señal DE Hora PerdidaEn la fábrica se siguen los cuidados para mantener Procedimientos DE DesinfecciónNi infectarán su suministro de agua ni causarán que Sobre el sistema de descalcificación de agua Cómo romper un puente de sal Cómo limpiar la ensambladura de la boquilla y el Venturi Característica/Servicio Diagnóstico electrónico automático Operación normal, Pantalla de controlFunción Controles opcionales de recargado Función MemoriaVisualizado Vea la sección Programación del control Servicio Diagnóstico electrónico iniciado manualmenteServicio Inspección manual del avance de la recarga Servicio Configurar el código del modelo F o PCuándo rellenar con sal Si una luz indicadora Cuidado y limpieza del sistema de descalcificación de aguaQué hacer Antes de llamar para solicitar servicio…Veces el agua Luz intermitente azul Lista de partes 151 Catálogo DE Partes DE General Electric Catálogo de partesNO. Refer Por el período de Reemplazamos Garantía GE para el Sistema de Descalcificación de AguaLo que no está cubierto Piezas y accesorios Soporte al Consumidor Página Web de GE AppliancesSolicite una reparación Garantías ampliadasReal Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website