KitchenAid KDRU707 manual Settings, Sound Tones, Temp FormatFahrenheitand Celsius, DisplayContrast

10.Touch OFF when finished cooking.

Always unplug and remove the temperature probe from the oven when removing food. The probe symbol will remain lit in the display until the probe is unplugged.

Settings

Your oven provides you with the ability to control several of the default settings and access information through the on-screen display. These include: Sound, Display Contrast, Temp Format, Calibration, Water Filter, Learn Mode, Sabbath Mode, and Languages.

To access the Settings menu, see the following sections.

Sound (Tones)

Tones are audible signals, indicating the following:

One beep

■Valid key touch

■Function has been entered

One chime

■Preheat cycle has been completed

Two chimes

■End of a cooking cycle

Three beeps

■Invalid key touch

Four chimes

■When timer reaches zero

Includes using the Timer for functions other than cooking.

Tone Volume (Sound)

■The preset volume can be changed. On double ovens, you can change the sound from either display. Changing the sound on one display changes the sound for both ovens.

To Change:

1.From the Main menu, touch MORE.

2.Touch SETTINGS.

3.Touch SOUND.

4.To change the sound level, touch the “plus” (+) or “minus” (-) signs to increase or decrease to the desired level.

5.Touch OK.

NOTE: To turn the sound off, touch “minus” (-) until the bar disappears to the left.

Temp Format(Fahrenheitand Celsius)

The temperature is preset in Fahrenheit; however, it can be changed to Celsius.

To Change:

1.From the Main menu, touch MORE.

2.Touch SETTINGS.

3.Touch TEMP FORMAT.

4.Touch °F (Fahrenheit) or °C (Celsius).

5.Touch OK.

Calibration (Oven Temperature Control)

IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door during cycling may give incorrect readings.

The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature calibration can be adjusted. It can be changed in Fahrenheit or Celsius.

A minus sign means the oven will be cooler by the displayed amount. The absence of a minus sign means the oven will be warmer by the displayed amount. Use the following chart as a guide.

ADJUSTMENT °F	COOKS FOOD
(AUTOMATIC °C CHANGE)
10°F (5°C)	...a little more
20°F (10°C)	...moderately more
30°F (15°C)	...much more
0°F (0°C)	...default setting
-10°F (-5°C)	...a little less
-20°F (-10°C)	...moderately less
-30°F (-15°C)	...much less

To Adjust Oven Temperature Calibration:

1.From the Main menu, touch MORE.

2.Touch SETTINGS.

3.Touch CALIBRATION.

4.Touch the + (plus) or - (minus) to increase or decrease the temperature.

5.Touch OK.

DisplayContrast

To Adjust Display Contrast:

1.From the Main menu, touch MORE.

2.Touch SETTINGS.

3.Touch DISPLAY CONTRAST.

4.Touch + (plus) or - (minus) to increase/decrease the display contrast to the desired setting.

5.Touch OK.

Water Filter/Filtration System

The Water Filter setting allows you to check the status of the water filter and reset the system after the filter has been replaced.

IMPORTANT: The oven will shut off the steam functions until the filter is replaced.

To Check Filter Status:

1.From the main menu, touch MORE.

2.Touch SETTINGS.

3.Touch WATER FILTER.

4.The status will be displayed. There are 3 water filter states: Good, Replace Filter Soon and Replace Filter. If the filter status is Replace Filter Soon or Replace Filter, the Reset key becomes available.

NOTE: See “Water Filter Cartridge Replacement” section.

16