Cooking with your Multicooker
Shallow frying
Add only sufficient quantity of oil to cover the surface of the vessel. Preheat oil on dial setting
Sauteing
This is a term which means foods are quickly fried and gently stirred in a small amount of hot butter, margarine or oil. Foods that are commonly sauteed are onions, mushrooms, garlic, capsicums and meats. Sauteing develops flavour. Preheat the vessel to dial setting
Boiling
Ideal for cooking vegetables where they are completely immersed in water which is brought to boiling point. Heat is regulated to continue the boiling action. Place the lid on the vessel unless stated in the recipe.
Dry Frying
Preheat the cooker to dial setting
Reheating Foods
To keep foods hot or reheat foods, place the leftovers into the vessel and heat on setting
Braising and Stewing
This is the ideal method for cooking tougher cuts of meat. First saute the food in butter or oil to develop the flavour. Then cover with stock, water or wine and cook for the suggested time and setting in the recipe. Always keep the lid on and the vent closed when braising or stewing.
Deep Frying
•It is essential that foods to be deep fried are completely immersed in the frying medium. Select any frying medium you wish, but refined, deodorised vegetable oils are recommended. They can be used more than once without marked deterioration. Sunbeam also recommends peanut oil
or solid vegetable shortening of reliable brands. Lard is the best of animal fats, but it tends to be very rich in flavour and odour. Dripping darkens quickly and is not completely satisfactory. DO NOT USE BUTTER OR MARGARINE FOR DEEP FRYING.
•Do not overfill the cooking vessel with oil
or shortening. Allow at least 8cm from the
top of the oil or shortening to the rim of the vessel. About 8 to 10 cups (2 to 2 ½ litres) of oil or 2kg of shortening is ample.
If more is used, boilovers may occur.
•Never leave oil or shortening at high frying temperatures for long periods of time. If cooking fried foods in batches, lower the temperature to setting
•NEVER PLACE THE LID ON THE VESSEL WHEN DEEP FRYING.
12