GE Monogram ZIS42N, ZISB42D, ZISW42D installation instructions ZKT42 Trim Kit, Custom Panels

Page 27

ZKT42 Trim Kit

3/4" Custom Panels

Tools and materials required:

•#2 Phillips screwdriver •Stubby Phillips screwdriver •Drill and appropriate bits •Safety glasses •Custom panels

These instructions are divided into 2 options: Option 1—For non-dispenser and dispenser models

using custom collar trim.

Option 2—For dispenser model using the standard full-width trim.

Kit contents

Parts List:

Freezer Door

A.Top trim

B.Side trim

C.Bottom trim

Fresh Food Door

D.Top trim

E.Side trim

F.Bottom trim

G.Panel support brackets (4)

H.4-3/8" screws for support brackets (20)

I.Grille support panel and screws ZKT42–6 screws

J.Wood screws #6 1/2" flat-head screws ZKT42–30 screws

A
B
C
D
E
F
G
H	J	INSTALLATION	ZKT42
H	J
	I

This kit provides for the installation of 3/4" custom door and grille panels, using the standard full length handle. This kit contains all the necessary parts to apply 3/4" panels on dispenser and non-dispenser models. Follow the instructions for Option 1 when applying custom panels to a non-dispenser model or dispenser model using custom collar trim. Follow instructions in Option 2 for a dispenser model using the standard full-width dispenser trim.

Note: If you are using custom handles, see ZKHT1 Installation Instructions. For tubular stainless steel handles, see ZKHTSS1 Installation Instructions.

27

Image 27

Contents Models GE Monogram Built-In RefrigeratorsTrim Kits Custom Panel DimensionsConsulter « Mise à terre du réfrigérateur », Design InformationBuilt-In Refrigerator True Flush InstallationTo accomplish an attractive installation, you must Design InformationCabinet Built-In RefrigeratorsThick 41-1/2Thick custom panels-Without trim kits You shouldNon-dispenser Custom Panel DimensionsZIS42N non-dispenser 67 15/16 Using Trim Kit ZKT42 Thick panel with standard handleZKT42 trim kit provides for the installation of 3/4 Custom door and grille panels, using the standard fullMax Freezer PanelZISB42D black dispenser ZISW42D white dispenserZISW42D white dispenser ZISB42D black dispenser Custom Door Panel Dimensions Using Standard TrimGrille Panel height can vary to fill installation Length handle. Cut panels to size and installLower freezer panel to allow placement of support Dispenser Brackets and install see detail aDetail B 67 15/16 Detail a and installDetail B Freezer Rout panels to specification below on See detail B Standard CustomTrim For All Monogram Built-In Refrigerators23 9/16 24 3/4Installation Use of Adapter plugUse of Extension Cords Washer Slide carton off top of cabinetShut off the main water supply Floor Copper TubingRotate Clockwise To Remove Filter Bypass Plug Side panels must be installed plumbFor Installations With a Reverse Osmosis System Only Step Install Side PanelsStep Level Refrigerator To install 1/4 door panelsStep Install Door Panels Step Roll Refrigerator Into OpeningOpen freezer door to access case trim Block Top View Refrigerator CabinetRefrigerator Door Spacer Block Installation height and must be adjusted To raise or lower case trim to other installation heightsTo insert decorative grille panel into the frame Tor door panels. Handles not included. The door Parts ListZKH1 Trim Kit For 1/4 Panels Support for Custom HandlesLocate position Option 1 Installation StepExtrusion Decorator Door Panel Handle Min 2 Max Door Handle Option 1 Installation Step Assemble panel Extrusion HandleStep Locate Position Handle Re-install dispenser trim, temporarilyTrim With Option 2 Installation Step Custom handleAssembled DispenserGrille Panel Frame Adjustment ZG2 Trim KitTo change grille panel size ZKT42 Trim Kit Custom PanelsFreezer Door Top trim Side trim Bottom trim Fresh Food Door Trim ModelsDimension B Option 1 Installation Step Adjust Grille panel Height Step Install1/16 Grille panelSecure 3/4 panel to grille panel support Back Side Freezer Panels Hinge Upper Lower Dimension a Dimension BInstall panel support brackets ZKT42-6-3/4Step Install Handles Step Install PanelsBack Side ZKHT1 Trim Kit For 3/4 PanelsFresh food door extrusion Freezer door extrusionStep Locate position of handles Step Temporarily Mount Door panelsOption 1 Installation Assemble panel, extrusion Handle Min 2 Max ScrewStep Mount assembled panels Before Option 1 InstallationModel using For dispenserAssembled ZKHSS1 for 1/4 Panels Tubular Stainless Steel HandlesTools and materials required Extrusion Decorator Door Panel Step Match Handle Extrusions to HandleSee a for Stainless Steel panels For Stainless Reinstall original screws into the door extrusionTape extrusions to panels to prevent movement See aRaised Panel on 1/4 Thick Backing For Stainless PanelsTubulor Stainless Steel Handles ZKHTSS1 for 3/4 PanelsFreezer panels Step Install Assembled Panels Step Install Standoffs onto HandlesZKHTSS1 17 11/16 67 7/8 15 1/4 67 15/16 15 1/16 15 5/16 ZWCD1 Trim KitCustom Dispenser Collar Collar trimSelect the door panel size for your application Monogram