Note: Security Mode is not disabled automatically when you delete a port's MAC address. Thus, a port may not have a MAC address associated with it yet still have security enabled. In this case, any end station attached to that port is deemed “unauthorized.” Always disable Security Mode on a port that does not have an assigned MAC address.
Clearing the Autolearning Database
Issue the following command to clear from the Autolearning database all MAC addresses associated with port 1 on the Security Module in slot 3.
ONline> clear security autolearn 3.1 mac_address all [ENTER]
If you do not enter a MAC address, the command defaults to All, which clears all MAC addresses from the Autolearning database for the specified ports.
Clearing the Security Intruder List
The Security Intruder list contains information regarding the 10 most recent intrusion attempts. Use the following command to completely clear the Intruder list.
ONline> clear security intruder_list [ENTER]
Intruder List cleared.
4 - 20 ONline
