3Com 5112M-TPLS installation and operation guide Showing Port Configurations

Showing Port Configurations

You can display information about the Security Module ports using the SHOW PORT SECURITY command. The following command displays:

–All of the addresses (up to four per-port) for a single port or

–All 12 ports on a Security Module or

–All ports on all Security Modules in a concentrator

The command example shown displays security information for all ports on the Security Module in slot 17.

ONline> show security port 17.all [ENTER]

Security Display for Module 5112M-TPLS in Slot 17:

Port Mode MAC Addresses General Information

17.01DISABLED 17-01-01-01-01-01 ETHERNET_1

17.02 EAVESDROP NONE ETHERNET_1

17.03INTRUSION 01-02-03-04-05-06 ETHERNET_1 01-02-03-04-05-07

17.04	FULL	NONE	ETHERNET_1
17.05	FULL	NONE	ETHERNET_1
17.06	FULL	NONE	ETHERNET_1
17.07	FULL	NONE	ETHERNET_1
17.08	FULL	03-02-01-00-09-08	ETHERNET_1
		03-02-01-00-09-09
		03-02-01-00-09-0a
17.09	FULL	NONE	ETHERNET_1
17.10	FULL	NONE	ETHERNET_1
17.11	FULL	NONE	ETHERNET_1
17.12	DISABLED	NONE	ETHERNET_1

The command example shown displays all security information, including configuration settings, for all ports on the Security Module in slot 17 (only 6 of the 12 ports are shown).

Configuring Security Features 4 - 15