❑MAC addresses will not be Autolearned
❑The port(s) will report an intrusion. (An intrusion is only reported if a port Action_on_intrusion setting is configured to either Disable_and_trap or Trap_only.)
Saving Security Configurations
The SAVE SECURITY command saves all security information for each port on every Security Module, and on every Ethernet module in the concentrator. Issue the following command to save security configurations and make the information permanent.
ONline> save security [ENTER]
Reverting Security Configurations
The REVERT SECURITY command reverts all security information for all ports on all Security Modules, and on all Ethernet modules in the concentrator to their previously saved settings. Issue the following command to revert security configurations.
ONline> revert security [ENTER]
Showing Security Configurations
The Security Module provides several SHOW commands that display:
❑Port security configurations for a single port, all ports on a Security Module, or all ports on all Security Modules in a concentrator
❑Entries in the Autolearning database
❑All entries in the Security Intruder list
The SHOW commands to display this information are described in the following sections.
4 - 14 ONline
