Unpacking Procedures
To unpack your Security Module:
1.Verify that the Security Module is the correct module by matching the model number listed on the side of the shipping carton to the model number you ordered.
Note that the product model number printed on the shipping box differs from the model number on the product. The model number on the shipping box contains the prefix ’3C9’.
If the module appears to be damaged, return it to the anti-static shielding bag, repack it in the shipping carton, and contact your local 3Com supplier.
2.Remove the Security Module, in its anti-static bag, from the shipping carton.
3.Remove the module from the anti-static shielding bag and inspect it for damage. Save the package of screws in the carton; you will need them when you attach a cable to the module. Always handle the Security Module by the faceplate, being careful not to touch the components.
Keep the shipping carton and anti-static shielding bag in which your module was shipped in case you want to repackage the module for storage or shipment. Record the serial number of your Security Module. A log for information specific to your modules is provided under the Slot Usage Chart in Appendix B of the ONline System Concentrator Installation and Operation Guide.
3 - 4 ONline 10BASE-T Security Module Installation and Operation Guide
