Select the place where you intend to instal the scale. Consider “4. Caution” on page 8.
Step 5 Level the Scale
Level the base unit by using the “Bubble spirit level” and “Levelling feet”.
Step 6 Adjust the Display Unit
Press the caps at the pole top from both sides and adjust the angle of the display unit.
Step 7 Connect the Power
Install the batteries (see page 11) or connect the AC adaptor or mains cable. Check the weighing accuracy. If the scale needs calibration, refer to “14 Calibration”.
Bubble spirit level
Leveling foot
Step 5
OK NG
Step 6 
