Step 8 | Press the | MODE | switch to display the HI, | |
| flashing, (of the final value). | |||
Step 9 | Set the final value using the following | |||
| switches:- |
|
|
|
| ^ switch | Selecting the value of a digit. | ||
| < switch | Selecting a digit. | ||
Step 10 | Press the |
|
| switch to store the new |
ENTER | ||||
| parameter and display the blinking OK | |||
| (of preliminary value). | |||
Step 11 | Set the preliminary value using the following | ||
| switches. |
|
|
| ^ switch | Selecting the value of a digit. | |
| < switch | Selecting a digit. | |
Step 12 | Press the |
| switch to store the new |
ENTER | |||
| parameter and display the blinking LO | ||
| (of zero band). | ||
Step 13 Set a zero band which is greater than the tare value, using the following switches.
^ switch | Selecting the value of a digit. |
< switch | Selecting a digit. |
Step 14 Press the ENTER switch to store the new parameter and display the weighing mode.
