6.1 Display and Symbols
Display and Symbols | Meaning | ||||
| Stability mark. |
| |||
| When the current weight value is not changing, this mark | ||||
| is displayed. The reading may now be taken. | ||||
|
|
|
|
|
|
| Zero point mark. |
| |||
| With nothing | on the pan and pressing the | |||
|
|
|
| switch or with a mass on the pan and pressing the | |
|
| ZERO | |||
|
| switch, this mark is displayed. The zero point is the | |||
| TARE | ||||
| starting point to weighing. | ||||
Net mark.
After pressing the TARE switch this mark is displayed to show net weight is displayed
Preset tare mark.
When storing a tare with digital input this mark blinks.
Accumulation mark.
When using the accumulation function, this mark is displayed.
Low battery mark for type L.
When the battery power is low this mark is displayed.
Replace with six new batteries.
Ready mark for the full/dribble batch function. This mark shows:
ON
OFF
Blinking
The comparator indicator.
Using the comparator function and comparing a weighing value with the upper and lower limits, the result is indicated.
Using the full/dribble batch function, the full flow gate indicator is shown as OK, the dribble flow gate indicator as HI and the zero band indicator as LO.
Example:- Display of zero (zero point).
With an empty weighing pan by pressing the ZERO switch:-
The Zero mark is displayed.
The stability mark is displayed.
