A&D HW-200KGL Accumulation Function, Operation and Switches, Function table Meaning & Purpose

10 Accumulation Function

This function counts the number of weighed items, calculates the total mass value and can display the number and accumulated mass value.

It is necessary to set the parameters of the “accumulation function (f8 )” in the function table in advance to use this function.

It is necessary to set the parameters of the “print mode ( f9 )” in the function table in advance to use the optional built-in printer.

Operation and Switches

The display of the accumulation count has a blinking M+ or

without a unit.

The display of the accumulation value has a blinking M+ kg or

kg with a unit.

Pressing the

MODE

switch, the accumulation count and accumulation value is displayed.

Pressing the

ZERO

switch in the accumulation function while a blinking M+ or is

displayed, resets the current function. The count and accumulated value become zero.

When the optional built-in printer is installed and the PRINT switch is pressed, the accumulation data, date and data number are printed. Date is set at function table f16 .

Caution

The accumulation function can only be used with the first weighing unit accumulated, e.g. you cannot accumulate pcs while displaying kg.

Parameter List and Word Definition

The “near-zero” is within±4 digits from the zero point in the unit of kg. The “digit”, a unit of display, is equivalent to the minimum graduation. The “zero point” is the fundamental starting point to weighing.

Function table		Meaning & Purpose
f8	0	Accumulation function not used.
		The scale accumulates the data, if the F switch is pressed when
		the display is a positive stable value above near-zero. The next
f8	1	accumulation can be performed after the display returns to
		near-zero or to a negative value.
f8	2	The scale accumulates the data, if the F switch is pressed, when
		the display is a stable value and outside near-zero. The next
		accumulation can be performed after the display returns to
		near-zero.
f8	3	When the display is a positive stable value, the scale accumulates
		the data automatically. The next accumulation can be performed
		after the display returns to near-zero or to a negative value.

HW-G Instruction Manual Page 25

HW-G OZIM v1a