7.1.2 Type L with Batteries
Step 1 Install six new batteries. Refer to “5.1. Installing the batteries for Type L”.
Step 2 Ensure that the pan is empty.
Step 3 The scale turns on/off using the ON/OFF
switch alternately.
Step 4 Check the accuracy of weighing. If you calibrate the scale, perform it after warming up the scale for 30 minutes. You will need to disable the auto power off function. See 15.2 page 43.
Step 5 Press the
ZERO
switch to display zero. (With nothing on the pan.)
Step 6 Gently place something on the pan.
Step 7 You can read the weight value after the stability mark is displayed.
Step 8 Remove the item from the pan.
Step 9 Turn the scale off using the
ON/OFF
switch.
Caution
Replace used dry cells with six new ones when BATT is displayed. Battery life is affected by the environmental temperature.
Remove batteries from the display unit when the scale is not to be used for a long time. The batteries may leak and cause damage.
