A&D HW-60KGL, HW-100KGL, HG-60KGV, HW-200KGL, HW-200KGV, HW-10KGV Full/Dribble Batch Function

12 Full/Dribble Batch Function

This function changes the scale to a filling machine which sub-divides a bulk product like grain into loads of predetermined and virtually constant mass.

It is necessary to set the parameter of the “comparator function ( f6 9 )”, “ full/dribble batch sub-function ( f10 0 ~ f10 3 )” in the function table, final value (HI), preliminary value (OK) and zero band (LO) in advance to use this function.

It is necessary to install option OP-03 or OP-04, if you use the relay output of the full/ dribble batch function.

In the example of a filling machine with a scale and hopper, the performance and processing of the system are assumed to be as follows:

					Zero Band	Preliminary value	Final value
					indicator/	indicator/	indicator/
					LO relay output	OK relay output	HI relay output
Gross < Zero band (Zero detection level)					ON/Make	OFF/Break	OFF/Break
Net < Final - Preliminary					OFF/Break	ON/Make	ON/Make
Final - Preliminary			<	Net < Final	OFF/Break	OFF/Break	ON/Make
Final	<	Net			OFF/Break	OFF/Break	OFF/Break

HW-G OZIM v1a

HW-G Instruction Manual Page 32