8 Counting Mode
Counting Mode
In counting mode the total weight of articles is converted to a count and assumes all articles have the same mass value.
It is necessary to store a unit mass to count articles.
8.1 Storing a Unit Mass
Step | 1 | Press the | MODE | switch to display the unit PCS. | ||||
Step | 2 | Press the |
| switch to enter the mode to store | ||||
SET | ||||||||
|
| a unit mass. | ||||||
Step | 3 | Press the ^ switch to select the number of | ||||||
|
| samples. The greater the quantity of samples, the | ||||||
|
| greater the accuracy of the count. Select from | ||||||
|
| 5 pieces, 10 pieces, 20 pieces, 50 pieces, 100 | ||||||
|
| pieces | ||||||
Step | 4 | Put the container onto the pan. | ||||||
|
| Press the |
|
| switch. | |||
|
|
| TARE | |||||
Step 5 Put in the number of samples selected at step 3. Press the ENTER switch to store the weight after the stability mark is displayed. The count is then displayed.
Caution
When the sample is too light and it is not possible to calculate a unit mass, the scale displays lo ut and returns to step 3. It is necessary to increase the number of samples.
Pressing the ENTER switch after the lo ut .is displayed, the next unit is displayed.
When the unit mass is too light to store, the scale displays lo ut .
Step 4 Remove all items from the pan.
