10.2 Operation and Performance (Examples)
Example 1
Weighing each article, the scale makes the accumulation according to
Step 1 Press the MODE switch to display M+ or | . |
f8 3
.
Step | 2 | Press the | ZERO | switch to reset the accumulation data. | ||||||
Step | 3 | Return to the kg mode using the |
| switch. | ||||||
MODE | ||||||||||
|
| Press the |
|
| switch with nothing on the pan. | |||||
|
| ZERO | ||||||||
Step | 4 | Put an article on the pan. Wait for the stability mark to be displayed and the | ||||||||
|
| value to blink. Remove the article and, if necessary, press the |
| switch. | ||||||
|
| ZERO | ||||||||
Step | 5 | Weigh additional articles using step 4. | ||||||||
Step | 6 | Press the |
| switch to display the number of articles and total mass with | ||||||
MODE | ||||||||||
|
| M+ or | displayed. | |||||||
Example 2
This example accumulates the articles that were removed from the pan. The function parameter is set to f8 4 .
Step 1 Enter into the kg mode using the MODE switch.
Put all articles on the pan and press the TARE switch.
Step 2 Press the
MODE
switch to display M+ or 
.
Step | 3 | Press the | ZERO | switch to reset the accumulation data. | ||||
|
| Retun to kg mode with the |
| switch. | ||||
|
| MODE | ||||||
Step | 4 | Remove an article from the pan. Wait for the stability mark to be displayed and | ||||||
|
| the value to be blinking. Press the |
| switch. | ||||
|
| TARE | ||||||
Step | 5 | Remove additional articles using step 4. | ||||||
Step 6 Press the
MODE
switch to display the number of articles and total mass
removed, with M+ or 
displayed.
