A&D TM-2430-13 instruction manual Field Description, Intervals and Conditions, Physician List

2-6-8 Patient Information

The Patient Information screen is used to store information on patients and their treatment. This is also the input screen for the patient’s Sleep interval.

Figure 18: Patient Information display

The Patient Information screen has the following data fields:

	(The characters referred to in the table below include CRs and spaces.)
Field	Description
Recorder ID	Recorder ID refers to the monitor identification number. The Recorder ID
	cannot be modified in this screen. It is established during the recorder setup
	prior to the monitoring session. See “2-7-3Programming the Monitor’s
	Intervals and Conditions”.
	For the TM-2420, the ID number is fixed to “1”.
Date	Date corresponds to the first measurement date in the patient record. Date
	cannot be modified in this screen. It is automatically set at the time the
	measurement was recorded.
Time	Time corresponds to the first measurement time in the patient record. Time
	cannot be modified in this screen. It is automatically set at the time the
	measurement was recorded.
File	File refers to the name of the file. It is initially defined by the user at the time of
	data retrieval. See “2-7-1 Retrieving Data from the Monitor”.
Name	There are two name fields. Enter up to 20 characters for the patient name
	when the data is retrieved. Selecting this field allows changes to the patient
	name. Enter up to 60 characters for the physician name. The physician’s name
	may be entered automatically by selecting the List button. See “2-9-2
	Physician List”.
Address	There are two address fields. The patient address field may be filled in
	manually. The physician address field may either be filled in manually, or
	automatically by selecting the List button. See “2-9-2Physician List”.
	Up to 50 characters can be used for each address field.
Phone	There are two telephone fields. The patient phone field may be filled in
	manually. The physician phone field may either be filled in manually, or
	automatically by selecting the List button. See “2-9-2Physician List”.
	Up to 20 characters can be used for each phone field.
Soc. Sec. #	Field for the patient’s social security number. Up to 20 characters can be used.

30