2-4 Toolbar

There are two toolbar buttons which appear underneath the main menu bar:

(1)Analysis Intervals

(2)BP Mode

2-4-1 Analysis Intervals

The Analysis Intervals feature is used to define specific periods of time within an opened data file for custom data analysis. Two intervals, Full Analysis and Partial Analysis may be defined for each data file.

Figure 4: Analysis Intervals dialog box

To set the Analysis Intervals, complete these steps:

Step 1 Click the Analysis Intervals button on the toolbar.

Step 2 Set each item in the Full analysis interval box, using the scroll bar.

Step 3 Check a Status button in the Partial analysis interval box. When “Enabled” is checked, set each item in the box.

Step 4 Click the Save button.

Step 5 To cancel the settings, click the Cancel button.

The Partial Analysis Interval affects many of the software features including:

Summary Data

After the Partial Analysis Interval is enabled, the Partial tab in the Summary Data will be activated.

Trend Graphs

After Partial Analysis Interval is defined, the data specified within the parameters will appear in red on the Trend Graph.

Correlation Plots

After Partial Analysis parameters are defined, a second set of Correlation plots in red will appear based on the data specified within the Partial Analysis parameters.

10

Page 11
Image 11
A&D TM-2430-13 instruction manual Toolbar, Analysis Intervals BP Mode