A&D TM-2430-13 instruction manual Status, See 3-1 Measurement Errors

2-6-2 BP Data List

The BP Data List function displays individual blood pressure measurement within an open data file in tabular form. With the BP Data List, you may input measurement comments, exclude/include a measurement within the graphics and statistics or link a measurement to the beginning of the Trends Screen.

The following table defines each heading within the Blood Pressure Data List:

Item			Description
#			Measurement number
DATE/TIME			Date and time of the measurement
SYS			Systolic blood pressure
DIA			Diastolic blood pressure
MAP			Mean arterial blood pressure, obtained by MAP=DIA+(SYS-DIA)/3
PUL			Pulse
DP			Double Product, obtained by DP=SYS∗ PUL/100
STATUS			The status line has 3 positions. When filled with a character other than “–”,
			each denotes a specific occurrence or condition.
Position		1	Denotes the BP method used for the specific measurement. “K” refers to
BP	method,		Korotkoff method, “O” refers to oscillometric method.
O or K
Position		2	Indicates that data was measured when the monitor’s EVENT button was
E (Event)			activated.
Position		3	Denotes the specific error code that occurred during the monitoring session,
Error code			see “3-1 Measurement Errors”.
Exclude			When this column has an “X”, the measurement has been excluded from the
			statistics and graphs.
Comments			Space provided for user to enter patient diagnostic notations up to 20
			characters.
Vertical	scroll		The vertical scroll bar on the right hand side of the screen helps scroll through
bar			the measurements. This may also be performed with the up and down arrow
			keys, as well as the mouse.
Save button			Saves any edits, i.e. comments, exclusions or inclusions.
Close button			Closes the screen.
			Note: Edits (comments, exclusions or inclusions) will not be saved.
Help button			Opens the Blood Pressure Data List help screen.

19