A&D TM-2430-13 Software Package Components, System Requirements, Installing the Software, Safety

1-4 Software Package Components

Items included in your complete software package are:

♦ABPM 3.5-inch program disk

♦Ambulatory Blood Pressure Monitor Data Analysis Software Instruction Manual

♦For TM-2420/TM-2421

AX-KO600 (9 pin D-SUB, socket type), Communication cable for TM-2420/TM-2421

♦For TM-2430 series/UA-767PC

AX-KO1502 (9 pin D-SUB, socket type), Communication cable for TM-2430 series

1-5 System Requirements

♦Computer

♦RAM Memory

♦Operating System

♦Graphic Adapter

♦Disk Type

♦Hard Disk

♦Serial Ports

♦Printer Type

A 486DX or higher microprocessor Minimum 16 MB

Windows™ 95, 98, Me, 2000, NT 4.0 SVGA video card

(minimum of 256 colors, 800X600 pixels or higher recommended)

3.5-inch floppy disk drive At least 2.5 MB

Minimum one (9 pin D-SUB or 25 pin D-SUB)

(A cable separately available is required for the 25 pin D-SUB serial port)

Printers supported by MS Windows™ operating system

1-6 Installing the Software

The software must be run from a hard disk drive only. It may not be run from a floppy disk. To install the software on your hard disk drive, complete the following instructions:

Step 1 Insert the program disk in drive A:.

Step 2 Click the Start button on the Windows taskbar and select Run.

Step 3 Type “a:setup”

Step 4 Click OK.

Step 5 Follow the instructions on the screen.

Note The serial number is required when installing the software. The serial number is printed on the label of the program disk.

1-7 Safety

Do not attach the monitor to a patient when the monitor, or the monitor and the processor, are being connected to a computer.

5