Aastra Telecom 6867i SIP manual Requirements, Installation and Setup

Welcome

Requirements

The 6867i requires the following environment:

•SIP-based IP PBX system or network installed and running with a SIP account created for the 6867i phone

•Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS)

•Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps] recommended)

•Category 5/5e straight-through cabling (Category 6 straight-through cabling required for optimum Gigabit Ethernet performance)

•Power source:

–For Ethernet networks that supply inline power to the phone (IEEE 802.3af) use an Ethernet cable to connect from the phone directly to the network for power (no 48V AC power adapter required if using Power-over-Ethernet [PoE])

–For Ethernet networks that DO NOT supply power to the phone:

Use only the GlobTek Inc. Limited Power Source [LPS] adapter model no. GT-41080-1848 (sold separately) to con- nect from the DC power port on the phone to a power source

or

–Use a PoE power injector or a PoE switch

Installation and Setup

If your System Administrator has not already setup your 6867i phone, please refer to the Aastra 6867i Installation Guide for basic installation and physical setup information. For more advanced administration and configuration information, System Administrators should refer to the Aastra SIP IP Phones Administrator Guide.

2 41-001524-00 REV00 – 04.2014