Off-Hook Screen 6751i RP & 6753i RP

When the phone is off-hook (or you pick up the handset), the screen displays as follows.The "1" in the upper corner in the above example indicates the idle screen for the first line appearance. A "2" appears for the second line, and so on.

=Dial

No Service Screen 6751i RP & 6753i RP

When the phone is not properly connected to the network, or the account has not been configured by the System Administrator, the "No Service" or "Network Disconnected" prompt appears on the display and the telephone status light turns ON.

2Thomas Sharp No Service

Sat Jan 1 12:00a

The phone also displays the default time and date of 12:00am Jan. 1st. Check that the cables are tightly connected to the phone and to the wall jack. The phone should automatically detect when the connection is reconnected and displays the "Network Connected" prompt temporarily.

If changes have been made to your phone settings using the Microsoft Response Point Administrator software, your phone should restart automatically with an initial screen display of "Restarting...", during which time your phone will not be available to make and receive calls.

For more information about connecting your phone, refer to the AastraLink RP Administrator Guide. Check with your System Administrator for assistance.

Initializing 6757i CT RP

The 6757i CT RP automatically begins the start up sequence as soon as it is connected. The phone goes through this process the first time you plug in your phone and every time you restart your phone.

The phone displays the following startup screens.

Checking for

DHCP: waiting

Firmware

for IP...

AastraLink RP Phone User Guide

15

Getting Started

Page 15
Image 15
Aastra Telecom CT Cordless manual Initializing 6757i CT RP, Off-Hook Screen 6751i RP & 6753i RP