RP Cordless Handset

List empty

Use web page to configure

A newly registered handset or handset that was out-of-range during the

programming needs to perform an "off-hook and on-hook" sequence in order for the newly programmed function to be broadcast. Simply press the v key from the idle state to go off-hook. Then, press the y key to go back on-hook.

Duplicate functions can exist in the feature key as there is no filtering or duplicate checking done on the handset or the base.

If no line keys are programmed for the feature key, the handset is restricted to intercom calls only.

If all 12 programmable functions have been programmed to "None", the user is presented with a List empty message when the feature key is pressed.

For security reasons, the user has 180 seconds (3 minutes) to complete the programming. Otherwise, the phone displays the following error:

**Error **: Session expired, Please reload page.

For security reasons, the user must submit the page from the same browser that was used to load the page. If the user tries to submit the page from any other IP address, the following error displays:

**Error ** Session invalid. Different Client IP Addresses. Please reload page

Using Your 6757i CT

Programming Feature Keys

You can program up to 15 feature keys on the 6757i CT RP phone using the Aastra Web UI.

84

AastraLink RP Phone User Guide

Page 84
Image 84
Aastra Telecom CT Cordless manual RP Cordless Handset, Programming Feature Keys