Park/Pickup Keys

The IP phone has a park and pickup call feature that allows you to park a call and pickup a call when required. There are two ways a user can configure this feature:

Using a static configuration

Using a programmable configuration (on the softkeys)

Note: The IP phone accepts both methods of configuration. However, to avoid redundancy, Aastra Telecom recommends you configure either a static configuration or a programmable configuration.

The IP phone supports the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ PBX servers.

The following paragraphs describe the park and pickup methods of configuration on the IP phones.

Park/Pickup Static Configuration

You can configure a static configuration for parking and picking up a call using the Aastra Web UI at Basic Settings-> Preferences.

By entering the appropriate value in the "Park Call" and "Pickup Parked Call" fields, you tell the phone where to park a live call and where to pickup the parked call.

On the IP phone UI, the static configuration method displays the following:

When a call comes in, and you pickup the handset, the default label of "Park" displays on the Phone UI.

After pressing the "Park" softkey to park the call, the default label of "Pickup" displays on the phone UI.

Note: On the 57i handset, pressing Ï displays the "Park" and "Pickup" labels.

Line Keys and Softkeys

Model 57i IP Phone User Guide

91

Page 99
Image 99
Aastra Telecom IP Phone manual Park/Pickup Keys, Park/Pickup Static Configuration