Line Keys and Softkeys

Empty Key

You can set a softkey to force a blank entry on the IP phone display for a specific softkey. You do this by setting the softkey to "empty". The softkeys are added in order (from softkey1 to softkey20) after any hard-coded keys have been added. If a particular softkey is not defined, it is ignored.

Setting an Empty Key

Aastra Web UI

Use the following procedure to configure an Empty softkey on the 57i phone.

1.Click on Operation->Softkeys and XML. or

Click on Operation->Expansion Module <N>.

2.Click on the Bottom tab or the Top tab.

3.Select from "Key 1" through "Key 20" on the bottom tab. or

Select from "Key 1" through "Key 10" on the top tab.

4.In the "Type" field, select Empty.

5.If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.

6.Click to save your changes.

108Model 57i IP Phone User Guide

Page 116
Image 116
Aastra Telecom IP Phone manual Setting an Empty Key