Line Keys and Softkeys

Creating a Speeddial Key Using the Aastra Web UI

Aastra Web UI

Use the following procedure to set a key to function as a speeddial.

1.Click on Operation->Softkeys and XML. or

Click on Operation->Expansion Module <N>.

2.Click on the Bottom Keys tab or the Top Keys tab.

3.Select from "Key 1" through "Key 20" on the bottom tab. or

Select from "Key 1" through "Key 10" on the top tab.

4.In the "Type" field, select Speeddial to apply to the softkey.

5.In the "Label" field, enter a label to apply to this softkey.

6.In the "Value" field, enter the phone number, extension, or speeddial prefix to apply to this key. If you enter a speeddial prefix, you must enter the "+" character at the end of the prefix number (for example, "123456+").

7.In the "Line" field, select a line to apply to this softkey. Valid values are 1 through 9.

8.If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.

9.Click to save your changes.

66Model 57i IP Phone User Guide

Page 74
Image 74
Aastra Telecom IP Phone manual Creating a Speeddial Key Using the Aastra Web UI