Line Keys and Softkeys
State-Based Softkeys (Bottom Keys only)
On the 57i bottom softkeys, you can configure a specific state to display when a softkey is being used.
None | None |
None | None |
None | None |
| Softkeys |
|
|
The following table describes the states available to configure for the softkeys.
State | Description |
|
|
idle | The phone is not being used. |
|
|
connected | The current line is in an active call (or the call is on hold). |
|
|
incoming | The phone is ringing. |
|
|
outgoing | The user is dialing a number, or the |
|
|
busy | The current line is busy because the line is in use or the line is set as |
| “Do Not Disturb”. |
|
|
The following table identifies the applicable default states for each softkey type on the IP phone.
Softkey Type | Default States |
|
|
None | All states disabled. |
|
|
Line | idle, connected, incoming, outgoing, busy |
|
|
Speeddial | idle, connected, incoming, outgoing, busy |
|
|
DND | idle, connected, incoming, outgoing, busy |
|
|
BLF | idle, connected, incoming, outgoing, busy |
|
|
BLF List | idle, connected, incoming, outgoing, busy |
|
|
Auto Call | idle |
Distribution (ACD) |
|
56Model 57i IP Phone User Guide