2.Enter a server value in the Park Call field to which incoming live calls are parked.

Note: For values to enter in this field, see the table "Park/Pickup Call Server Configuration Values" on page 92.

3.Enter a server value in the "Pickup Parked Call" field.

Note: For values to enter in this field, see the table "Park/Pickup Call Server Configuration Values" on page 92.

4.Click to save your changes.

Park/Pickup Key Configuration

The programmable method of configuration creates park and pickup softkeys that you can configure on the 57i phone.

You can set a softkey as "Park" or "Pickup" and then:

specify a customized label to display on the Phone UI

specify a value

specify which line to use

specify the state of the park and/or pickup keys

On the IP phone UI, the Park/Pickup feature displays the following:

When a call comes in, and you pickup the handset, the custom label that you configured for the Park softkey displays on the Phone UI.

After the call is parked, the label that you configured for the Pickup softkey displays on other phones in the network. You can then press the "Pickup" softkey, followed by the applicable value to pickup the call on another phone in your network.

You can configure a Park and Pickup programmable configuration using the Aastra Web UI.

Key Configuration Using the Aastra Web UI

On the 57i, you configure a Park and/or Pickup key at Operation->Softkeys and XML. You enter a key label, and value for a specific line on the phone. The default state of the Park configuration is "connected". The default state of the Pickup

configuration is "idle, outgoing".

Note: Applicable values depend on the server in your network (Asterisk, BroadWorks, Sylantro, ININ PBX. See the table "Park/Pickup Call Server Configuration Values" on page 92.

Line Keys and Softkeys

Model 57i IP Phone User Guide

93

Page 101
Image 101
Aastra Telecom IP Phone manual Park/Pickup Key Configuration, Key Configuration Using the Aastra Web UI