Initialization, Board level tests | ADTRAN 1202076L1, 1202076L2

Chapter 2. Installation

The full self-test procedure (invoked from the front panel or T-Watch PRO) consists of the following tests:

Board level tests

Each of the TSU 600 boards contains an on-board processor which exe- cutes a series of tests checking the circuitry on the board.

•RAM and EPROM tests

•Verify on-board circuitry

Unit level tests

•Front panel LED verification

•Board-to-board interface test

A test pattern is sent from the controller through a loopback on all other boards and checked on the controller. This verifies the data path, clocks, and control signals for the entire chassis.

Initialization

Set User Passcode

The TSU 600 is designed to operate with or without the use of a pass- code. The default condition is without a passcode.

If the unit is to be remotely accessed using T-Watch PRO, you must enter a passcode. When managing a number of units, the passcode can be the same for all the units.

The passcode should be a number easily remembered. Once entered, the passcode is required to access any operation other than viewing. See Set Passcode on page 6-2.

Set Unit Identification

The Unit ID sets the unit to respond to remote control (controlled by a device other than the front panel or terminal). If no Unit ID is recorded it is not possible to operate from any remote control device, including the local PC for T-Watch PRO or SNMP. See Unit ID on page 6-3 for de- tails.

2-12

TSU 600 User Manual

61202076L1-1

Image 38

ADTRAN 1202076L1 Initialization, Board level tests, Unit level tests, Set User Passcode, Set Unit Identification

Contents

TSU TSU 600e Part Numbers 1202076L1 1202076L1#DC 1202076L2 1202076L2#DC Trademarks Year 2000 Compliance REN/SOC FIC Usoc Page Canadian Emissions Requirements Canadian Equipment Limitations Affidavit Requirements for Connection To Digital Services Page Page Important Safety Instructions Warranty and Customer Service Table of Contents Status Menu Configuration MenuOperation Loopback Tests Table of Contents List of Figures TSU 600 Option Modules List of Figures List of Tables List of Tables Product Description IntroductionTSU 600 Overview Standard Features in the TSU TSU Option Modules Module Name Description Option Module Architecture TSU 600 Option Modules TSU 600 Configuration Applications Router, PBX, Video Conferencing Application Drop and Insert, Voice, and Router Application Set Up Drop and Insert, Voice, and Router Application Receipt Inspection InstallationUNPACK, INSPECT, Power UP Adtran Shipments Include Backup Power Supply 600e only Power ConnectionDC Powered Units Example Installing and Replacing the Power Supply Step Action Grounding Instructions Identification of Rear Panel Layout 1a.TSU 600 Rear Panel 1b.TSU 600 with DC Power Rear Panel 1c.TSU 600e Rear Panel 1d.TSU 600e with DC Power Rear Panel Control Port Input TSU 600 InterfacesNetwork Test Interface Chain Port Output Slot Option Slot Arrangement10BaseT Interface 600e only Self-Test Power-up TestingSlots Unit level tests InitializationBoard level tests Set User Passcode Chain In/Chain Out Set Control PortChain-In PC Normal Power-Up Procedure Operation Front Panel CSU Status LEDs System green If the LED is illuminated green , all installedModule Status LEDs If the LED is illuminated red , one or both TSU 600 Front Panel Layout Operation Keys General Menu Operation Selecting and Activating a Menu Item Example of Basic Front Panel Menu Travel Step Action Result Editing the Data Field Display Only Data Fields Exit Any Menu Field Operation Or Display Data Port Identification Module Slots, TSU Front Panel Menu Structure Watch PRO/LAN Connection Alternate Methods of ControlWatch PRO Adtran PC Program Connect the PC Com port to the Chain-In port on Watch PRO/EIA-232 Connection Terminal Mode Connection Telnet Connection Operation Status Menu Complete Status Menu Network Performance Reports NI Perf Rpts Network Interface Performance Report Network Interface Errors NI Errors Active Alarms View History Remote Port Clear Port AlarmPort Status Enet Status 600e only PS Status 600e only Configuration Menu Configuration Menu Xmit PRM Network NINetwork NI Menu Items Lpbck SET LBOInband BIT Stuffing TSU 600 Clock Sources Network Timing DTE Timing DTE Timed Clock Source BR1TE Slot Internal Timing Internal Clock Source Secondary Timing Secondary Clock Source Normal CSU Timing Normal CSU Unit Menu CTL OFF Map Exchange Map Xchng MenuMAP In Use AB Menu Auto Create Temp DS0 Map a and DS0 Map B MenuCopy a Temp Edit Temp Review MAPReview Temp Apply Temp a Create Temp Selection Screen Port Configuration Port Config Configuration Menu Utility Menu Utility Menu Tree Set Passcode Factory RestoreTime/Date Enter Passcode from Other Menus Change/Set a Passcode Automatic Time-out FeatureUnit ID No Passcode Desired Port Utility CMD ModeSoftware Revision Software Rev Enet Address 600e only Test Menu Test Menu Network Tests Loopback Tests Local Loopbck Network Interface Loopbacks LLB Ansi FDL PLB Remote LoopbkATT In-Band Ansi FDL LLB Qrss Pattern Test PatternPattern Description SES Pattern ResultBES Sync Run Self-Test Cancel Tests Port Tests Telnet/Terminal Menus Main Menu Status, Config, Util, and Test Menu Options DS0 Maps Configuration Menu Step Action Initializing the Temp Map Reviewing Maps Editing the Temp MapApplying the Temp Map Unit Access Table Remote Menu AccessManagement Configuration Modify Unit Delete Unit Snmp Read/Write Community Default Unit PasscodeSnmp Read Community System Contact Snmp Trap CommunitySystem Name System Location Flash Download Quit Session Telnet/Terminal Menus Network Manager Appendix a Understanding SnmpBasic Components Agent Commands Message TSU 600 Snmp Access Snmp Trap Configuration Snmp MIB Browser Configuration Snmp MIB Files Appendix B Understanding TR-08 OOF Table B-1. Alarm ConditionsFelp DS0 TR-08 DS0 Conversion TableTable B-2.TR-08 DS0 Conversion Table TR-08 Channel Number Port Appendix B. Understanding TR-08 Network WiringNetwork Pinouts Network Connections Table C-2.Control In/Chain In Pinout Control In/ChainChain-in Connections Table C-3. Chain-Out Pinout Chain-OutChain-out Connections 10BaseT Ethernet 10BaseT 600e only10BaseT Connections Message Description Alarm Messages Network Interface NISystem Messages Status Messages Network Interface NI T1/FT1 Interface SpecificationsElectrical Specifications Option Slot Interface CompatibilityManagement Interfaces Environmental Specifications Appendix E. Specifications Index Numerics 600 Index-3 Index-4 61202076L1-1 Index-5 Index-6 61202076L1-1 Repair and Return Presales Inquiries and Applications SupportPost-Sale Support