Ctl | ADTRAN 1202076L2#DC, 1202076L1#DC manual

Chapter 5. ConfigurationMenu


	Subnet	Defines which part of a destination IP address is
	Mask	the network number. Used along with the TSU
		600e IP address to determine which nodes must
		be reached through the default IP Gateway.
		This value is set to 0.0.0.0 when the IP interface
		option is set to SLIP.

	Default	All IP Packets destined for nodes not on the TSU
	Router	600e unit’s local network are not forwarded
		through this IP address. Normally, this address
		defines a router connected to the TSU 600e unit’s
		local network. This value is ignored when the IP
		interface is set to SLIP.

	SLIP Rate	Sets the baud rate for the Chain-In port when
		used as the SLIP connection for SNMP manage-
		ment.
		Choices: 1200, 2400, 4800, 9600, 19200, 38400

	SLIP Flow	Used to activate flow control on the Chain-In
	CTL	port when used as the SLIP interface. Hardware
		mode uses RTS and CTS.
		Choices: None, Hardware

	Proxy Traps	Enables or disables the transmission of trap mes-
		sages from units being "proxied" for.
		Choices: Enable, Disable

5-10

TSU 600 User Manual

61202076L1-1

Image 70

ADTRAN 1202076L2#DC, 1202076L1#DC user manual Ctl

Contents

TSU TSU 600e Part Numbers 1202076L1 1202076L1#DC 1202076L2 1202076L2#DC Trademarks Year 2000 Compliance REN/SOC FIC Usoc Page Canadian Emissions Requirements Canadian Equipment Limitations Affidavit Requirements for Connection To Digital Services Page Page Important Safety Instructions Warranty and Customer Service Table of Contents Operation Configuration MenuStatus Menu Loopback Tests Table of Contents List of Figures TSU 600 Option Modules List of Figures List of Tables List of Tables TSU 600 Overview IntroductionProduct Description Standard Features in the TSU TSU Option Modules Module Name Description Option Module Architecture TSU 600 Option Modules TSU 600 Configuration Applications Router, PBX, Video Conferencing Application Drop and Insert, Voice, and Router Application Set Up Drop and Insert, Voice, and Router Application Receipt Inspection InstallationUNPACK, INSPECT, Power UP Adtran Shipments Include Backup Power Supply 600e only Power ConnectionDC Powered Units Example Installing and Replacing the Power Supply Step Action Grounding Instructions Identification of Rear Panel Layout 1a.TSU 600 Rear Panel 1b.TSU 600 with DC Power Rear Panel 1c.TSU 600e Rear Panel 1d.TSU 600e with DC Power Rear Panel Control Port Input TSU 600 InterfacesNetwork Test Interface Chain Port Output 10BaseT Interface 600e only Option Slot ArrangementSlot Slots Power-up TestingSelf-Test Unit level tests InitializationBoard level tests Set User Passcode Chain-In PC Set Control PortChain In/Chain Out Normal Power-Up Procedure Operation Front Panel CSU Status LEDs System green If the LED is illuminated green , all installedModule Status LEDs If the LED is illuminated red , one or both TSU 600 Front Panel Layout Operation Keys General Menu Operation Selecting and Activating a Menu Item Example of Basic Front Panel Menu Travel Step Action Result Editing the Data Field Display Only Data Fields Exit Any Menu Field Operation Or Display Data Port Identification Module Slots, TSU Front Panel Menu Structure Watch PRO Adtran PC Program Alternate Methods of ControlWatch PRO/LAN Connection Connect the PC Com port to the Chain-In port on Watch PRO/EIA-232 Connection Terminal Mode Connection Telnet Connection Operation Status Menu Complete Status Menu Network Performance Reports NI Perf Rpts Network Interface Performance Report Network Interface Errors NI Errors Active Alarms View History Port Status Clear Port AlarmRemote Port Enet Status 600e only PS Status 600e only Configuration Menu Configuration Menu Network NI Menu Items Network NIXmit PRM Lpbck SET LBOInband BIT Stuffing TSU 600 Clock Sources Network Timing DTE Timing DTE Timed Clock Source BR1TE Slot Internal Timing Internal Clock Source Secondary Timing Secondary Clock Source Normal CSU Timing Normal CSU Unit Menu CTL OFF Map Exchange Map Xchng MenuMAP In Use AB Menu Auto Copy a Temp DS0 Map a and DS0 Map B MenuCreate Temp Edit Temp Review MAPReview Temp Apply Temp a Create Temp Selection Screen Port Configuration Port Config Configuration Menu Utility Menu Utility Menu Tree Set Passcode Factory RestoreTime/Date Enter Passcode from Other Menus Change/Set a Passcode Automatic Time-out FeatureUnit ID No Passcode Desired Port Utility CMD ModeSoftware Revision Software Rev Enet Address 600e only Test Menu Test Menu Network Tests Loopback Tests Local Loopbck Network Interface Loopbacks LLB Ansi FDL PLB Remote LoopbkATT In-Band Ansi FDL LLB Pattern Description Test PatternQrss Pattern SES Pattern ResultBES Sync Run Self-Test Cancel Tests Port Tests Telnet/Terminal Menus Main Menu Status, Config, Util, and Test Menu Options DS0 Maps Configuration Menu Step Action Initializing the Temp Map Applying the Temp Map Editing the Temp MapReviewing Maps Management Configuration Remote Menu AccessUnit Access Table Modify Unit Delete Unit Snmp Read Community Default Unit PasscodeSnmp Read/Write Community System Contact Snmp Trap CommunitySystem Name System Location Flash Download Quit Session Telnet/Terminal Menus Network Manager Appendix a Understanding SnmpBasic Components Agent Commands Message TSU 600 Snmp Access Snmp Trap Configuration Snmp MIB Browser Configuration Snmp MIB Files Appendix B Understanding TR-08 Felp Table B-1. Alarm ConditionsOOF DS0 TR-08 DS0 Conversion TableTable B-2.TR-08 DS0 Conversion Table TR-08 Channel Number Port Appendix B. Understanding TR-08 Network WiringNetwork Pinouts Network Connections Chain-in Connections Control In/ChainTable C-2.Control In/Chain In Pinout Chain-out Connections Chain-OutTable C-3. Chain-Out Pinout 10BaseT Connections 10BaseT 600e only10BaseT Ethernet System Messages Alarm Messages Network Interface NIMessage Description Status Messages Network Interface NI Electrical Specifications SpecificationsT1/FT1 Interface Management Interfaces CompatibilityOption Slot Interface Environmental Specifications Appendix E. Specifications Index Numerics 600 Index-3 Index-4 61202076L1-1 Index-5 Index-6 61202076L1-1 Post-Sale Support Presales Inquiries and Applications SupportRepair and Return