Chapter 3. Operation

Data Port Identification

When configuring the unit, menu selections will include options from data port submenus. Selecting of data ports is necessary because the TSU 600 uses a Slot-Port method to identify which data port the menu item is referencing. If a module containing a PBX DSX-1 option card with an Nx56/64 plug-on interface is installed in option slot 6, it would be designated as:

DSX-1 Passthru=6.1

Where slot=6 and port =1.

The DSX-1 is located in option slot 6 and is the first port in that slot.

Nx56/64=6.2

Where slot=6 and port=2.

The Nx is located in Slot 6 and is the second port in that slot.

Viewed from the rear of the TSU 600, the module slots are arranged as shown in Figure 3-4.

 

 

 

 

SLOT 1

 

SLOT 4

SUPPLY

 

 

 

SLOT 2

 

SLOT 5

 

 

 

 

 

POWER

SLOT 3

 

SLOT 6

 

 

 

 

 

 

Figure 3-4.

Module Slots, TSU 600

 

61202076L1-1

TSU 600 User Manual

3-9

Page 49
Image 49
ADTRAN 1202076L2#DC, 1202076L1#DC user manual Data Port Identification, Module Slots, TSU