ADTRAN 1202076L2#DC, 1202076L1 Editing the Temp Map, Applying the Temp Map, Reviewing Maps

Chapter 8. Telnet/Terminal Menus

Editing the Temp Map

If further changes to the Temp Map are needed, do the following:

Step	Action	Explanation
1	Use selection 7 to enter	Upon entering this mode, the cursor
	the Temp Map edit	location moves to DS0 number one in the
	mode.	DS0 field of the Temp Map.
		The cursor may be moved from one DS0
		to another by using the up and down
		arrows until the cursor is located at the
		DS0 number whose assigned port needs
		to be changed.
2	Press the Enter key to	The up and down arrows are then used
	cause the cursor to move	to scroll through the possible port selec-
	into the Port field.	tions.
3	Press the ESC key	This restores the previous port assign-
		ment and returns to the DS0 field.
4	Press the Enter key	This saves the current selected port and
		returns to the DS0 field.
		Once the cursor is again located in the
		Temp Map DS0 field, press the ESC key
		a second time to return to selection 1
		below the Temp Map display.

Applying the Temp Map

Once the Temp Map reflects the desired configuration, use selections 8 or 9 to apply this configuration to Map A or B, respectively.

Reviewing Maps

Selections 4 through 6 give a summary of the number of ports assigned to Map A, Map B, and the Temp Map, respectively.

8-4 TSU 600 User Manual 61202076L1-1