ADTRAN 1202076L1#DC Snmp Read Community, Default Unit Passcode, Snmp Read/Write Community

Chapter 8. Telnet/Terminal Menus

Default Unit Passcode

Sets the default passcode for all devices in the table that have passcodes set to DEFAULT, or for any unit not listed in the table.

OK

Returns to the Configure Agent menu.

SNMP Read Community

SNMP Read Community Name defaults to public. NMSs using this community name have Read access for all supported MIB objects but do not have the ability to change MIB objects. This value must be set to the same value on both the TSU 600 and the NMS (OpenView®, etc.) in or- der for the NMS to have Read access to MIBs supported by the TSU 600. This value must be a text string of 16 characters or less.

SNMP Read/Write Community

SNMP NMS using this community name have full read/write access to all supported MIB objects (defaults to private). This setting must be the same value on both the TSU 600 and the NMS in order for the NMS to have read/write access to MIBS supported by the TSU 600. This value must be a text string that is 16 characters or less.

To access other units external to the TSU 600 (proxied units) using an SNMP MIB browser, append a period and the Unit ID of the external device to the Read Only and Read/Write community name used in the MIB Browser, for example, public.4. See Appendix A, Understanding SNMP on page A-1, for more information.

61202076L1-1 TSU 600 User Manual 8-7