Unit Menu | ADTRAN 1202076L2#DC, 1202076L1#DC guide

Chapter 5. Configuration Menu

Unit Menu

The Unit menu changes the baud rate of the Chain-In port and the setup ofthe Chain-Out port. The menuitems are:


Ctl Port	Sets the baud rate for communication with the
Rate	PC or modem.
	Choices: 1200, 2400, 9600, 19200 and 38400 kbps

Traps	Enables or disables the transmission of trap mes-
	sages.
	Choices: Enable, Disable

Access	Sets the method of connection from the TSU 600
	to T-Watch PRO/SNMP.
	Choices:
	Direct - Used if connected directly to the PC
	Dial - Used when connection is through a
	modem. The dial string is entered from T-Watch
	PRO/SNMP.

Init Modem	Allows you to choose an industry standard or a
	custom initialization string for a modem con-
	nected to the control port.

Control Port	Selects the TCP/IP physical interface.
	Choices: SLIP using the EIA-232 serial port or
	10BaseT Ethernet (600e only).
	If this option is set to SLIP, the Chain-In port
	may not be used as a terminal interface.

IP Address	Uniquely identifies the TSU 600 on a TCP/IP
	network. This address is composed of four deci-
	mal numbers, each in the range of 0 to 255, sepa-
	rated by periods.

61202076L1-1

TSU 600 User Manual

5-9

Image 69

ADTRAN 1202076L2#DC, 1202076L1#DC user manual Unit Menu

Contents

Part Numbers 1202076L1 1202076L1#DC 1202076L2 1202076L2#DC TSU TSU 600e Trademarks Year 2000 Compliance REN/SOC FIC Usoc Page Canadian Emissions Requirements Canadian Equipment Limitations Affidavit Requirements for Connection To Digital Services Page Page Important Safety Instructions Warranty and Customer Service Table of Contents Configuration Menu OperationStatus Menu Loopback Tests Table of Contents TSU 600 Option Modules List of Figures List of Figures List of Tables List of Tables Introduction TSU 600 OverviewProduct Description Standard Features in the TSU Module Name Description TSU Option Modules TSU 600 Option Modules Option Module Architecture Router, PBX, Video Conferencing Application TSU 600 Configuration Applications Drop and Insert, Voice, and Router Application Drop and Insert, Voice, and Router Application Set Up UNPACK, INSPECT, Power UP InstallationReceipt Inspection Adtran Shipments Include DC Powered Units Power ConnectionBackup Power Supply 600e only Example Step Action Installing and Replacing the Power Supply Grounding Instructions 1a.TSU 600 Rear Panel Identification of Rear Panel Layout 1b.TSU 600 with DC Power Rear Panel 1c.TSU 600e Rear Panel 1d.TSU 600e with DC Power Rear Panel Network Test Interface TSU 600 InterfacesControl Port Input Chain Port Output Option Slot Arrangement 10BaseT Interface 600e onlySlot Power-up Testing SlotsSelf-Test Board level tests InitializationUnit level tests Set User Passcode Set Control Port Chain-In PCChain In/Chain Out Normal Power-Up Procedure Front Panel Operation CSU Status LEDs Module Status LEDs If the LED is illuminated green , all installedSystem green If the LED is illuminated red , one or both TSU 600 Front Panel Layout General Menu Operation Operation Keys Example of Basic Front Panel Menu Travel Selecting and Activating a Menu Item Editing the Data Field Step Action Result Exit Any Menu Field Operation Or Display Display Only Data Fields Module Slots, TSU Data Port Identification Front Panel Menu Structure Alternate Methods of Control Watch PRO Adtran PC ProgramWatch PRO/LAN Connection Watch PRO/EIA-232 Connection Connect the PC Com port to the Chain-In port on Telnet Connection Terminal Mode Connection Operation Complete Status Menu Status Menu Network Interface Performance Report Network Performance Reports NI Perf Rpts Network Interface Errors NI Errors View History Active Alarms Clear Port Alarm Port StatusRemote Port PS Status 600e only Enet Status 600e only Configuration Menu Configuration Menu Network NI Network NI Menu ItemsXmit PRM Inband SET LBOLpbck BIT Stuffing Network Timing TSU 600 Clock Sources DTE Timed Clock Source BR1TE Slot DTE Timing Internal Clock Source Internal Timing Secondary Clock Source Secondary Timing Normal CSU Normal CSU Timing Unit Menu CTL MAP In Use AB Menu Map Exchange Map Xchng MenuOFF Auto DS0 Map a and DS0 Map B Menu Copy a TempCreate Temp Review Temp Review MAPEdit Temp Apply Temp a Create Temp Selection Screen Port Configuration Port Config Configuration Menu Utility Menu Tree Utility Menu Time/Date Factory RestoreSet Passcode Enter Passcode from Other Menus Unit ID Automatic Time-out FeatureChange/Set a Passcode No Passcode Desired Software Revision Software Rev CMD ModePort Utility Enet Address 600e only Test Menu Test Menu Loopback Tests Network Tests Network Interface Loopbacks Local Loopbck ATT In-Band Remote LoopbkLLB Ansi FDL PLB Ansi FDL LLB Test Pattern Pattern DescriptionQrss Pattern BES Pattern ResultSES Sync Run Self-Test Port Tests Cancel Tests Main Menu Telnet/Terminal Menus DS0 Maps Configuration Menu Status, Config, Util, and Test Menu Options Initializing the Temp Map Step Action Editing the Temp Map Applying the Temp MapReviewing Maps Remote Menu Access Management ConfigurationUnit Access Table Delete Unit Modify Unit Default Unit Passcode Snmp Read CommunitySnmp Read/Write Community System Name Snmp Trap CommunitySystem Contact System Location Quit Session Flash Download Telnet/Terminal Menus Basic Components Appendix a Understanding SnmpNetwork Manager Agent Message Commands Snmp Trap Configuration TSU 600 Snmp Access Snmp MIB Files Snmp MIB Browser Configuration Appendix B Understanding TR-08 Table B-1. Alarm Conditions FelpOOF Table B-2.TR-08 DS0 Conversion Table TR-08 DS0 Conversion TableDS0 TR-08 Channel Number Port Appendix B. Understanding TR-08 Network Pinouts WiringNetwork Network Connections Control In/Chain Chain-in ConnectionsTable C-2.Control In/Chain In Pinout Chain-Out Chain-out ConnectionsTable C-3. Chain-Out Pinout 10BaseT 600e only 10BaseT Connections10BaseT Ethernet Alarm Messages Network Interface NI System MessagesMessage Description Status Messages Network Interface NI Specifications Electrical SpecificationsT1/FT1 Interface Compatibility Management InterfacesOption Slot Interface Environmental Specifications Appendix E. Specifications Numerics Index 600 Index-3 Index-4 61202076L1-1 Index-5 Index-6 61202076L1-1 Presales Inquiries and Applications Support Post-Sale SupportRepair and Return