ADTRAN 1202076L2#DC Review MAP, Review Temp, Edit Temp, Apply Temp a, Create Temp Example

￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿Chapter 5. Configuration Menu
REVIEW MAP	Permits a quick review of the number of
A(B)	DS0s assigned to each port and the number
	of unassigned DS0s (Idle or TST) as defined
	in the currently applied Map A(B).
REVIEW TEMP	This menu item is operated the same for
	the Temp map as is 3)REVIEW MAP A or
	Map B.
EDIT TEMP	The map in the Temp file can be edited to
	whatever configuration is desired. If Map
	A had been copied into the Temp file, then
	after editing, the Temp file could be
	applied to MAP A or MAP B. The menu
	operation is identical to 2) CREATE TEMP
	with the exception that the existing port
	selections display.
APPLY TEMP > A	Writes the Temp map into Map A. Pressing
	Apply is usually the last step in updating a
	map and is accessed automatically at the
	end of editing or creating a temporary
	map. It can be bypassed at this time by
	selecting another menu choice.

Create Temp Example

A sample selection follows for Create Temp:

DS0: 01 to 24

PORT: IDLE, TST, + option module ports

TST designates which DS0s are used for QRSS testing when activated under the TEST Menu. When not used for testing, the TST designation is identical to IDLE.

61202076L1-1 TSU 600 User Manual 5-13