ADTRAN 1202076L1#DC, 1202076L2#DC user manual Set Lbo, Inband, Lpbck, BIT Stuffing

￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿Chapter 5. Configuration Menu
SET LBO	Selects the line build out for the network interface.
	In AUTO mode, the TSU 600 sets the LBO based
	on the strength of the receive signal and displays
	the selected value.
	Choices: 0.0 dB, 7.5 dB, 15 dB, 22 dB, and Auto
	To activate the -36 dB receiver sensitivity, set
	the LBO to AUTO. This feature is useful in a
	point-to-point application where no network
	elements are involved. If a network element
	such as a Smart Jack is installed on the circuit,
	the LBO should be set to 0 dB.
INBAND	Sets unit to accept or reject the network interface
LPBCK	loop-up and loop-down codes as defined in ANSI
	T1.403.
	Choices: Accept, Reject
BIT STUFFING	When enabled, bit stuffing causes the TSU 600 to
	monitor for ones (1s) density violations and insert
	a one (1) when needed to maintain ones at 12.5%.
	Choices: Enable, Disable
TR-08	The TR-08 submenu configures the unit for TR-08
	applications. The submenu items and their
	descriptions follow.
	Alarm Report
	Enables and disables the transmitting of alarm
	reports.
	Choices: SEND ALARMS, DISABLE ALARMS
	Alarm Format
	Sets the alarm frame format to 13 frames or 16
	frames.
	Choices: ORB-13, ORB-16
	BPV Threshold
	Sets the threshold for BPVs to trigger an alarm.
	Choices: 10-4, 10-5, 10-6

61202076L1-1 TSU 600 User Manual 5-3