Chapter 8. Telnet/Terminal Menus

Normally, map configuration involves these steps.

Step

Action

1Initializes the Temp Map to one of three config- urations (current Map A, current Map B, or all IDLEs). This step is optional.

2Edits the Temp Map so that it reflects the desired map configuration.

3Replaces the current DS0 map A or B configura- tion with the Temp Map configuration.

Initializing the Temp Map

Upon entering the DS0 maps configuration menu, the Temp Map re- flects its last configured state. You can then use the following selections.

Use selections...

To initialize...

 

 

1, 2, 3

the displayed Temp Map to one of three

 

configurations.

 

 

1, 2

the Temp Map from its current configura-

 

tion to one which reflects the currently

 

stored Map A or B configurations, respec-

 

tively.

 

 

3

the Temp Map to an all IDLE state.

 

 

61202076L1-1

TSU 600 User Manual

8-3

Page 91
Image 91
ADTRAN 1202076L1#DC, 1202076L2#DC user manual Step Action, Initializing the Temp Map