Chapter 5. Configuration Menu
DS0 Map A and DS0 Map B Menu
The DS0 maps designate which DS0s are assigned to which port. See Figure
T E M P
D S 0 A
D S 0 B
Figure 5-7. DS0 Map Designations
DS0 A and DS0 B are the current maps the TSU 600 uses.
The Temp Map generates a map before putting it into use.
You can copy DS0 A to DS0 B by copying the DS0 A map into the Temp map. Then apply (write) the Temp map into DS0 B.
Themenuitems are:
|
|
COPY A >TEMP | Copies the current map (A or B) into a |
| Temp map area. |
| Permits modification without disturbing |
| the existing map. When the modifications |
| are completed, the Temp map is written to |
| current MAP A (B) by selecting Apply. |
|
|
CREATE TEMP | Creates a map by defining a port or Idle for |
| all DS0s. |
| When CREATE TEMP is first selected, all |
| DS0s are set to Idle. See Create Temp Exam- |
| ple on page |
|
|
TSU 600 User Manual |