Agilent Technologies B, 8163A, 8164A, 8166A - page 161

Signal Conditioning Measurement Operations & Settings
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition 161
command: :CONFigure[n][:CHANnel[m]]:OFFSet:WAVelength:VALue
syntax: :CONFigure[n]][:CHANnel[m]]:OFFSet:WAVelength:VALue<wsp><lambda>[PM | NM | UM | MM|
M],<offset[DB]> | TOREF
description: Adds a value pair (wavelength; offset) to the offset table, or overwrites an existing value pair.
The offset table entries are ordered from shortest to longest wavel ength.
parameters: <lam bda>
<offset>
TOREF
The wavelength for the offset tabl e entry, in m
The power offset to be applied at <lambda>.
To query the current power value measured by atten uator with power control
see page 87 (Fetch) and page 90 (Read).
Calculates the difference between the power measured by an external power-
meter (hosted in the same mainframe) and the power measured by the attenu-
ator module’s integrated powermeter, and stores i t as the offset.
P Offset ( λ )(dB) = P att (dBm) - P ext (dBm)
See: “:CONFigure[n][:CHANnel[m]]:OFFSet:WAVelength:REFerence” on
page161
(Attenuator modules with p ower control only).
response: none
example: CONF1:OFFS:WAV:VAL +1.55000000E-006,TORE F
affects: All attenuator modules (TOREF applicable to atte nuator modules with power control only ).
command: :CONFigure[n][:CHANnel[m]]:OFFSet:WAVelength :REFerence
syntax: :CONFigure[n]][:CHANnel[m]]:OFFSet:WAVelength:REFerence<wsp><slot>,<channel>
descripti on: S pecifies the slot and ch annel of the external powermete r (hosted in the same mai nframe as
the attenuator module) used by TOREF.
See: “:CONFigure[n][:CHANnel[m] ]:OFFSet:WAVelength:VALue” on page 161
parameters: <slot >
<channel>
Slot number of the powermeter.
Channel number of the powermeter.
response: none
example: CONF1:OFFS:WAV:REF 4,2
affects: Attenuator modules with power c ontrol.