Agilent Technologies 8164A, B, 8166A, 8163A manual 267

GPIB Error Strings			Error Codes
Table 18 Overview for Supported Strings
		Error
	New/Old/Standard	Number	String
	New	-305	"Internal messaging error (StatCmdError)"
			"Internal messaging error (StatCmdNotAllowed)"
			"Internal messaging error (StatWrongLength)"
			"Internal messaging error (StatWrongReceiver)"
			"Internal messaging error (StatBufAllocError)"
			"Internal messaging error (StatDPRamFull)"; }
			"Internal messaging error (StatSemError)"
			Description:
			An error has occured in the instrument communication system. Please re-
			port this error with a description of the circumstances that generated the
			error and the configuration of the system.
	New	-306	"Channel doesn't support this command (StatCmdUnknownForSlave)"
			Description:
			Slave channels have limited functionality. The module supports this com-
			mand, but the command must be sent to the master channel.
	New	-307	"Channel without head connection (StatHeadless)"
			Description:
			The channel supports this command, but it cannot be executed because
			the optical measurement head is not plugged into the interface module.
	Standard	-310	“System error”
			[Indicates that some error, termed “system error” by the device, has oc-
			curred. This code is device-dependent.]
	Standard	-321	“Out of memory”
			[An internal operation needed more memory than was available.]
	New	-322	"Flash programming error (StatFlashEraseFailed)"
			"Flash programming error (StatFlashWriteFailed)"
			"Flash programming error (StatFlashDataCntError)"
			"Flash programming error (StatFlashDPAlgoFailed)"
			Description:
			An error has occured in a module. Please report this error with a descrip-
			tion of the circumstances that generated the error and the configuration of
			the system.

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition 267