Agilent Technologies 8163A, B, 8166A, 8164A manual 262, Old 211, Old 212, Old 213, Old 220

Error Codes			GPIB Error Strings
Table 18 Overview for Supported Strings
		Error
	New/Old/Standard	Number	String
	Old	-211	“Trigger ignored”
			Description:
			A trigger has been detected but ignored because of timing contraints. (For
			Example: average time to large).
	Old	-212	“Arm ignored”
			Description:
			The user can set the automatic re-arming option for input and output trig-
			ger events (see “Triggering - The TRIGger Subsystem” on page 171). When
			this error occurs, the device ignores the setting because the current mod-
			ule status does not allow the change of trigger settings.
	Old	-213	“Init ignored”
			Description:
			The INIT:IMM command (page 88) initiates a trigger and completes a full
			measurement cycle. The continuous measurement must be DISABLED.
			This error code is generated if the powermeter is still in cont. measure-
			ment mode.
	Old	-220	"Parameter error (StatParmError)”
			Description:
			The user has passed a parameter that cannot be changed in this way. The
			device cannot detect one of the following more specific errors:
	Old	-220	-220, "Parameter error (StatParmOutOfRange)"
			Description:
			The user has passed a parameter that exceeds the valid range for this pa-
			rameter.
	Old	-220	"Parameter error (StatParmIllegalVal)"
			Description:
			The user has passed a parameter that does not match a value in a list of
			possible values.

262 Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition