4
Front-Panel Voltage and Current Settings
You can set the voltage and current from the front panel using the following
method.
1Press the key after turning on the power supply.
2Set the knob to the voltage control mode or current control mode using the voltage/
current adjust selection key.
3Move the blinking digit to the appropriate position using the resolution selection keys.
4Change the blinking digit to the desired value using the control knob.
5Press the key to enable the output. After about 5 seconds, the
display will go to the output monitor mode automatically to display the voltage and
current at the output.
Note All front panel keys and controls can be disabled with remote interface commands.
The Agilent E3631A must be in "Local" mode for the front panel keys and controls to
function.
Use the voltage/current adjust selection ke y, the resolution selection keys, and
the control knob to change the limiting or li mitings value of voltage or c urrent.
Display Limit
Output On/Off