Store

Recall

Recall

Chapter 2 Quick Start

To store and recall the instrument state

4Save the operating state.

The operating state is now stored. To recall the stored state, go to the following steps.

done

This message appears on the display for approximately 1 second.

5Turn on the recall mode.

Memory location "1" will be displayed in the recall mode.

recall 1

This message appears on the display for approximately 3 seconds.

6Recall the stored operating state.

Turn the knob to the right to change the displayed storage location to "3".

recall 3

If this setting is not followed within 3 seconds with a Recall key stroke, the power supply returns to normal operating mode and will not recall the instrument state 3 from memory.

7Restore the operating state.

The power supply should now be configured in the same state as when you stored the state on the previous steps.

done

This message appears on the display for approximately 1 second.

35

2

Page 36
Image 36
Agilent Technologies E3631A manual Turn on the recall mode, Recall the stored operating state, Restore the operating state