Displaying Linear List of Parameters
1.Install the HIM on the
2.Turn on machine power.
3.After three to five seconds of initialization, display will show the status display. If drive is in a faulted condition, fault will appear in display; otherwise, drive will read current status. Refer to examples below.
Faulted Drive |
| Normal Condition |
|
|
|
Fault Description |
| Status of Drive |
Fault Number |
| Frequency Commanded |
|
|
|
6.Press the Enter key 
to choose Group Level. Display will read:
Choose Group
Linear List
For earlier HIM versions, press the Enter key 
to choose Main File. Display will read:
Linear List
Main File
7. Use the Up and Down arrow keys | to |
select “Linear List.” |
|
Examples of Faults
Serial Fault
F 10
Max Retries Fault F 33
Example of Normal
Condition
Stopped
+0.00 Hz
8. Press the Enter key | to choose Parameter |
Level. Display now shows all parameters in | |
numerical order. |
|
Output Voltage
0 Vlts 1
4. Press any key to enter Mode Level,
ESC SEL
. Display will read:
Choose Mode
Display
5.Use the Up and Down arrow keys 
to select “Display” if not displayed immediately.
9.Use the Up and Down arrow keys 
to select desired parameter display.
10.From this point, press the Escape key ESC to move display up one Level (i.e., press the Escape key three times to return to Operator Level).
104 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F232120 |