AMX NI-2000, NI-3000, NI-4000 instruction manual Logging Into a Session

	NetLinx Security with a Terminal Connection
Help Menu Options (Cont.)
Command	Description
SET DNS <D:P:S>	Setup the DNS configuration of a device.
SET ICSP PORT	Sets the IP port listened to for ICSP connections.
SET ICSP TCP TIMEOUT	Sets the timeout period for ICSP and i!-WebControl TCP connections.
SET IP <D:P:S>	Setup the IP configuration of a device.
SET TELNET PORT	Sets the IP port listened to for Telnet connections.
SET THRESHOLD	Sets the Master's internal message thresholds.
SET TIME	Set the current time.
SET URL <D:P:S>	Setup the initiated connection list URLs of a device.
SHOW COMBINE	Displays a list of devices, levels, and channels that are currently com-
	bined.
SHOW DEVICE <D:P:S>	Displays a list of devices connected and attributes.
SHOW LOG <START>	Display the message log. <start> specifies message to begin the
	display. 'all' will display all messages.
SHOW NOTIFY	Display the Notify Device List (Master-Master).
SHOW REMOTE	Displays the Remote Device List (Master-Master).
SHOW ROUTE	Displays the Master's routing information.
SHOW SYSTEM <S>	Displays a list of devices in a system.
TCP LIST	Displays a list of active TCP connections.
TIME	Display the current time.
URL LIST <D:P:S>	Display the initiated connection list URLs of a device.
SSL SECURITY	Enables or Disables the Web Server SSL security.
ENABLE:DISABLED

Logging Into a Session

Until Telnet security is enabled, a session will begin with a welcome banner.

Welcome to NetLinx v2.10.80 Copyright AMX Corp. 1999-2004

>

The welcome banner is not displayed for Terminal sessions.

When Terminal security is enabled, the user will be prompted for a user name and password before they will be allowed to access any commands available from Telnet. No welcome banner will be displayed until a valid login is made. When the session is started, the user will see a login prompt as seen below:

Login:

The user (Login) name is case sensitive. The user name must be entered with the exact combination of upper and lower case letters as was assigned to them by the security administrator. The user name must be at least 4 characters long and no more than 20 characters. Any combination of letters, numbers, or other characters may be used.

The user would enter their user name and then would be prompted for a password:

Login: User1

Password:

NetLinx Integrated Controllers 107