AMX NI-4000, NI-3000, NI-2000 instruction manual Installation and Upgrading

Table of Contents
Installation and Upgrading	29
Installing NetLinx Control Cards (NI-4000 Only)	29
Setting the NetLinx Control Card Addresses (NI-4000 Only)	30
Device:Port:System (D:P:S)	30
Removing NetLinx Control Cards (NI-4000 Only)	31
Compact Flash Upgrades	31
Accessing the internal components on an Integrated Controller	31
Installation of Compact Flash upgrades	32
Closing and Securing the Integrated Controller	33
Installing the Integrated Controller into an Equipment Rack	34
Configuration and Firmware Update	37
Communicating with the Master via the Program Port	37
Setting the System Value	38
Using multiple NetLinx Masters	39
Changing the Device Address on a NetLinx Device	40
Recommended NetLinx Device numbers	41
Resetting the Factory Default System and Device Values	41
Obtaining the Master’s IP Address (using DHCP)	42
Assigning a Static IP to the NetLinx Master	43
Communicating with the On-board Master via an IP	44
Verifying the current version of NetLinx Master Firmware	46
Upgrading the On-board Master Firmware via an IP	46
Upgrading the NI Controller Firmware via an IP	48
Upgrading the new NI Controller firmware via an IP	49
Upgrading the Control Card Firmware via an IP	51
NetLinx Security and Web Server	53
NetLinx Security web browser and feature support	53
New Master Firmware Security Features	54
NetLinx Security Terms	54
Accessing the NetLinx Master via its IP Address	55
WebControl Tab	55
Default Security Configuration	56
Security Tab	57
Security tab - Enable Security page	58
Security tab - Add Group page	59
Security tab - Modify Group page	60
Security tab - Group Directory Associations page	61
Security tab - Add User page	63

ii NetLinx Integrated Controllers