AMX NI-2000 NI-4000 Specifications, Introduction, Front, Rear, Dimensions HWD, Power requirements

Introduction

Link/Active-Status-Output-Input	RS-232/422/485 TX/RX LEDs (red/yellow)
		Relay LEDs (red)
			IR/Serial LEDs (red)

NetLinx

Card

slots

(1-4)

Front

I/O LEDs (yellow)

	RS-232/422/485 (Ports 1-7)			ICSNet (2)		AXLink LED
Rear				ICSHub Out		(green)
						AXLink
Relays					Ethernet	port
	I/O (Port 17)	IR/Serial (Ports 9-16)
(Port 8)
				DIP
				switch
			Program port
						PWR
CardFrame DIP	Slot 1-4 connectors
switch			ID Pushbutton

FIG. 6 NI-4000 front and rear panel components

NI-4000 Specifications

Dimensions (HWD):	• 5.21" x 17.00" x 9.60" (13.23 cm x 43.18 cm x 24.27 cm)
	• 3 RU (rack unit) high
Power requirements:	• 900 mA @ 12 VDC (no cards)
Memory:	• 32 MB SDRAM
	• 1 MB of Non-volatile Flash
Compact Flash:	• 32 MB Card (upgradeable). Refer to the Optional Accessories section on
	page 14 for more information.
Weight:	• 9.15 lbs (4.15 kg)
Enclosure:	• Metal with black matte finish
Front Panel Components:
LINK/ACT	• Green LED lights when the Ethernet cable is connected and an active link
	is established. This LED also blinks when receiving Ethernet data packets.
Status	• Green LED lights to indicate that the system is programmed and
	communicating properly.
Output	• Red LED lights when the Controller transmits data, sets channels On/Off,
	sends data strings, etc.
Input	• Yellow LED lights when the Controller receives data from button pushes,
	strings, commands, channel levels, etc.
RS-232/422/485 LEDs	• Seven sets of red and yellow LEDs light to indicate the rear DB9 Ports 1-7
	are transmitting or receiving RS-232, 422, or 485 data:

-TX LEDs (red) light when transmitting data

-RX LEDs (yellow) light when receiving data

-LED activity reflects transmission and reception activity

NetLinx Integrated Controllers 11